Mivoc AWM 124

12" · 4 Ω · 220 W · 94.6 dB · datasheet ↗

Thiele-Small parameters

Nominal size	12"
Impedance	4 Ω
Fs	30 Hz
Qts	0.251
Qes	0.26
Qms	7.5
Vas	68 L
Sd	507 cm²
Xmax	4.7 mm
Re	3.1 Ω
Bl	18.3 T·m
Mms	149.1 g
Pe	220 W
Sensitivity	94.6 dB

Alignment hint

EBP	115 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 9.8 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Raveland BSW 124-II	28 -2	0.252 =	91.4 +23.4	5.4 +0.7	94.7 +0.1	close		+
BMS 12S330	28.6 -1.4	0.24 -0.01	85.5 +17.5	8 +3.3	96 +1.4	usable	8 Ω vs 4 Ω: amp load changes	+
BMS 12S330 v2016	28.6 -1.4	0.24 -0.01	85.5 +17.5	8 +3.3	92.3 -2.3	usable	8 Ω vs 4 Ω: amp load changes	+
SICA 12 S 2.5 CS	33 +3	0.265 +0.01	93.7 +25.7	6 +1.3	94 -0.6	usable	8 Ω vs 4 Ω: amp load changes	+
RCF L12P300	40 +10	0.27 +0.02	76 +8	5 +0.3	94.2 -0.4	usable	8 Ω vs 4 Ω: amp load changes · 150 W vs 220 W: lower power handling	+
Focal 33VX	34 +4	0.322 +0.07	66.5 -1.5	6.4 +1.7	94.7 +0.1	usable		+
Helix P12W PRECISION	27 -3	0.25 =	72 +4	8.5 +3.8	89 -5.6	usable		+
Magnat XTC300	30 =	0.317 +0.07	81 +13	6.9 +2.2	93.8 -0.8	usable		+
BMS 12S305	35 +5	0.265 +0.01	82 +14	11 +6.3	95 +0.4	usable	8 Ω vs 4 Ω: amp load changes	+
BMS 12S302	45 +15	0.253 =	65 -3	4.5 -0.2	96 +1.4	usable	8 Ω vs 4 Ω: amp load changes · Xmax 4.5 mm < 4.7 mm: lower excursion-limited SPL	+

Compare the closest 3 against the AWM 124 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.