Mivoc AWM 104

10" · 4 Ω · 220 W · 92.2 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	4 Ω
Fs	31 Hz
Qts	0.26
Qes	0.27
Qms	7.4
Vas	37 L
Sd	346 cm²
Xmax	5.2 mm
Re	3.1 Ω
Bl	16.4 T·m
Mms	119.6 g
Pe	220 W
Sensitivity	92.2 dB

Alignment hint

EBP	115 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 5.8 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Pioneer TS-W252PRS	29 -2	0.282 +0.02	30.1 -6.9	7 +1.8	91.1 -1.1	usable		+
SEAS L26RO4Y-XM004-04 v2018	26 -5	0.27 +0.01	40 +3	6.3 +1.1	89.4 -2.8	usable		+
Alcone AC 10 SW-4	28 -3	0.231 -0.03	48 +11	5.1 -0.1	92.4 +0.2	usable	170 W vs 220 W: lower power handling · Xmax 5.1 mm < 5.2 mm: lower excursion-limited SPL	+
DLS W610	32.9 +1.9	0.216 -0.04	40.3 +3.3	4.6 -0.6	93.4 +1.2	usable	Xmax 4.6 mm < 5.2 mm: lower excursion-limited SPL	+
Phase Linear SX 10	35 +4	0.327 +0.07	35 -2	5.9 +0.7	92.7 +0.5	usable		+
Eminence HL 10	32 +1	0.282 +0.02	29.2 -7.8	5.7 +0.5	88.9 -3.3	usable	8 Ω vs 4 Ω: amp load changes	+
Infinity KAPPA PERFECT 10D VQ31	25.1 -5.9	0.301 +0.04	37.7 +0.7	8.4 +3.2	91.7 -0.5	usable	2 Ω vs 4 Ω: amp load changes	+
Faital PRO 10RS430 vp B184423	36.3 +5.3	0.293 +0.03	43 +6	7 +1.8	91 -1.2	usable	8 Ω vs 4 Ω: amp load changes	+
Max Speaker CA-1060/4	34 +3	0.307 +0.05	28.4 -8.6	6.1 +0.9	92 -0.2	usable		+
SICA 10 S 3 PL v2017	43 +12	0.265 +0.01	39.9 +2.9	6.1 +0.9	94.5 +2.3	usable	8 Ω vs 4 Ω: amp load changes	+

Compare the closest 3 against the AWM 104 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.