Mercuriale PAR 260 M0
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 55 Hz |
| Qts | 0.227 |
| Qes | 0.25 |
| Qms | 2.51 |
| Vas | 25.5 L |
| Sd | 344 cm² |
| Xmax | 1.8 mm |
| Re | 6.8 Ω |
| Bl | 22.6 T·m |
| Mms | 54.5 g |
| Pe | 100 W |
| Sensitivity | 95 dB |
Alignment hint
| EBP | 220 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 2.9 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Monacor SP-25A/250PA | 52 -3 | 0.24 +0.01 | 29 +3.5 | 2.5 +0.7 | 95.8 +0.8 | close | + | |
| ATC PA75-234 STD LS | 59 +4 | 0.265 +0.04 | 22 -3.5 | 1.9 +0.1 | 95.5 +0.5 | close | 75 W vs 100 W: lower power handling | + |
| B&C 10 NW 64 | 50 -5 | 0.255 +0.03 | 27.5 +2 | 4.3 +2.5 | 94.9 -0.1 | usable | + | |
| RCF L10/750YK | 68 +13 | 0.24 +0.01 | 26 +0.5 | 2.5 +0.7 | 97 +2 | usable | 6 Ω vs 8 Ω: amp load changes | + |
| PHL Audio 3490 | 54 -1 | 0.258 +0.03 | 28 +2.5 | 4.2 +2.4 | 96.9 +1.9 | usable | + | |
| JBL 2251J | 61 +6 | 0.2 -0.03 | 28.6 +3.1 | 4.1 +2.3 | 94.9 -0.1 | usable | 16 Ω vs 8 Ω: amp load changes | + |
| B&C 10FW64 | 63 +8 | 0.23 = | 27 +1.5 | 5 +3.2 | 98 +3 | usable | + | |
| Faital PRO 10FH500 | 60 +5 | 0.25 +0.02 | 24.2 -1.3 | 7.25 +5.45 | 96 +1 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| RCF L 10/750YK | 68 +13 | 0.236 +0.01 | 26 +0.5 | 2.5 +0.7 | 99.1 +4.1 | usable | + | |
| Faital PRO 10FH500 | 60 +5 | 0.26 +0.03 | 25.8 +0.3 | 7.5 +5.7 | 96 +1 | usable | + |
Compare the closest 3 against the PAR 260 M0 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.