Mercuriale HTR 276 G0

10" · 8 Ω · 160 W · 91.6 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	27 Hz
Qts	0.255
Qes	0.29
Qms	2.13
Vas	105 L
Sd	350 cm²
Xmax	3 mm
Re	6.2 Ω
Bl	14.4 T·m
Mms	56.8 g
Pe	160 W
Sensitivity	91.6 dB

Alignment hint

EBP	93 · flexible
Sealed Vb (Qtc ≈ 0.71)	≈ 15.7 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
ATS Acoustics HG25 vp Double ferrite	29.8 +2.8	0.26 +0.01	94.2 -10.8	4 +1	92.6 +1	close		+
SEAS 25F-EWX 4 vp	27 =	0.289 +0.03	100 -5	4 +1	93.2 +1.6	close	4 Ω vs 8 Ω: amp load changes · 60 W vs 160 W: lower power handling	+
SEAS 25F-EWX-4	27.5 +0.5	0.277 +0.02	92 -13	2.9 -0.1	93.1 +1.5	close	25 W vs 160 W: lower power handling · Xmax 2.9 mm < 3 mm: lower excursion-limited SPL	+
Audax PR240Z2	25 -2	0.261 +0.01	112 +7	5 +2	94.1 +2.5	close	4 Ω vs 8 Ω: amp load changes · 100 W vs 160 W: lower power handling	+
Vifa M26WR09-04	27 =	0.28 +0.03	113 +8	6.5 +3.5	93 +1.4	close		+
Audiotechnology 10C772510KAP	25 -2	0.24 -0.02	110 +5	8.6 +5.6	92.1 +0.5	close		+
Monacor SPH-250TC v2009	26 -1	0.25 -0.01	84 -21	4.5 +1.5	93.1 +1.5	close	4 Ω vs 8 Ω: amp load changes · 100 W vs 160 W: lower power handling	+
Monacor SPH-250TC v2011	26 -1	0.25 -0.01	84 -21	4.5 +1.5	93.1 +1.5	close	4 Ω vs 8 Ω: amp load changes · 100 W vs 160 W: lower power handling	+
HiVi S10IIP	27 =	0.287 +0.03	98.1 -6.9	7 +4	92.9 +1.3	close		+
ATC SB75-234 LC	26 -1	0.224 -0.03	120 +15	5 +2	91.8 +0.2	close	75 W vs 160 W: lower power handling	+

Compare the closest 3 against the HTR 276 G0 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.