MCM Electronics 55-2982
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 36.2 Hz |
| Qts | 0.407 |
| Qes | 0.476 |
| Qms | 2.823 |
| Vas | 121.7 L |
| Sd | 517 cm² |
| Xmax | 7 mm |
| Re | 6.3 Ω |
| Bl | 13.4 T·m |
| Mms | 59.4 g |
| Pe | 350 W |
| Sensitivity | 93.9 dB |
Alignment hint
| EBP | 76 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 60.3 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| McCauley 6232 | 35 -1.2 | 0.411 = | 106.2 -15.5 | 8.4 +1.4 | 93.6 -0.3 | close | + | |
| GRS 12PT-8 | 35 -1.2 | 0.387 -0.02 | 112 -9.7 | 7.8 +0.8 | 93 -0.9 | close | + | |
| Infinity KAPPA CS 120 BR | 35.2 -1 | 0.397 -0.01 | 123.2 +1.5 | 8 +1 | 97.1 +3.2 | close | 4 Ω vs 8 Ω: amp load changes · 250 W vs 350 W: lower power handling | + |
| Beyma SM212 vp Nº2 | 41.7 +5.5 | 0.41 = | 110.7 -11 | 7.3 +0.3 | 95.2 +1.3 | close | + | |
| JBL GT2-12 | 29.5 -6.7 | 0.42 +0.01 | 114.9 -6.8 | 8 +1 | 94.1 +0.2 | close | 4 Ω vs 8 Ω: amp load changes · 220 W vs 350 W: lower power handling | + |
| Ardan W PRO-31 | 36.8 +0.6 | 0.373 -0.03 | 133.9 +12.2 | 6 -1 | 94.6 +0.7 | close | 200 W vs 350 W: lower power handling · Xmax 6 mm < 7 mm: lower excursion-limited SPL | + |
| JBL P1200 | 30 -6.2 | 0.45 +0.04 | 123 +1.3 | 7.8 +0.8 | 92.8 -1.1 | close | 250 W vs 350 W: lower power handling | + |
| Faital PRO 12FE330 | 33 -3.2 | 0.45 +0.04 | 146.7 +25 | 8.32 +1.32 | 94 +0.1 | close | 250 W vs 350 W: lower power handling | + |
| Beyma SM112/N vp1 | 37 +0.8 | 0.433 +0.03 | 90 -31.7 | 7.3 +0.3 | 92.7 -1.2 | close | + | |
| Ciare HSB322-22 | 35 -1.2 | 0.42 +0.01 | 83 -38.7 | 7.5 +0.5 | 95 +1.1 | usable | 4 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the 55-2982 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.