← all drivers

McCauley 6232

12" · 8 Ω · 400 W · 93.6 dB · datasheet ↗

Thiele-Small parameters

Nominal size12"
Impedance8 Ω
Fs35 Hz
Qts0.411
Qes0.43
Qms9.06
Vas106.2 L
Sd532.9 cm²
Xmax8.4 mm
Re5.9 Ω
Bl15.3 T·m
Mms77.5 g
Pe400 W
Sensitivity93.6 dB

Alignment hint

EBP81 · flexible
Sealed Vb (Qtc ≈ 0.71)≈ 54.2 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
GRS 12PT-835 =0.387 -0.02112 +5.87.8 -0.693 -0.6closeXmax 7.8 mm < 8.4 mm: lower excursion-limited SPL+
MCM Electronics 55-298236.2 +1.20.407 =121.7 +15.57 -1.493.9 +0.3closeXmax 7 mm < 8.4 mm: lower excursion-limited SPL+
JBL GT2-1229.5 -5.50.42 +0.01114.9 +8.78 -0.494.1 +0.5close4 Ω vs 8 Ω: amp load changes · 220 W vs 400 W: lower power handling · Xmax 8 mm < 8.4 mm: lower excursion-limited SPL+
Ciare HSB322-2235 =0.42 +0.0183 -23.27.5 -0.995 +1.4close4 Ω vs 8 Ω: amp load changes · Xmax 7.5 mm < 8.4 mm: lower excursion-limited SPL+
Infinity KAPPA CS 120 BR35.2 +0.20.397 -0.01123.2 +178 -0.497.1 +3.5close4 Ω vs 8 Ω: amp load changes · 250 W vs 400 W: lower power handling · Xmax 8 mm < 8.4 mm: lower excursion-limited SPL+
Beyma SM212 vp N&ordm;241.7 +6.70.41 =110.7 +4.57.3 -1.195.2 +1.6closeXmax 7.3 mm < 8.4 mm: lower excursion-limited SPL+
Beyma SM112/N vp137 +20.433 +0.0290 -16.27.3 -1.192.7 -0.9closeXmax 7.3 mm < 8.4 mm: lower excursion-limited SPL+
SICA SAMPLE 716135.2 +0.20.437 +0.0379.6 -26.68 -0.491.7 -1.9usableXmax 8 mm < 8.4 mm: lower excursion-limited SPL+
Eminence KAPPALITE 3012 LF37 +20.324 -0.09106.7 +0.58.2 -0.295.5 +1.9usableXmax 8.2 mm < 8.4 mm: lower excursion-limited SPL+
Faital PRO 12FE33033 -20.45 +0.04146.7 +40.58.32 -0.0894 +0.4usable250 W vs 400 W: lower power handling · Xmax 8.32 mm < 8.4 mm: lower excursion-limited SPL+

Compare the closest 3 against the 6232 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.