Max Speaker CA-1060/4

10" · 4 Ω · 300 W · 92 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	4 Ω
Fs	34 Hz
Qts	0.307
Qes	0.32
Qms	7.8
Vas	28.4 L
Sd	314 cm²
Xmax	6.1 mm
Re	2.8 Ω
Bl	14.1 T·m
Mms	106.6 g
Pe	300 W
Sensitivity	92 dB

Alignment hint

EBP	106 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 6.6 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Phase Linear SX 10	35 +1	0.327 +0.02	35 +6.6	5.9 -0.2	92.7 +0.7	close	Xmax 5.9 mm < 6.1 mm: lower excursion-limited SPL	+
Pioneer TS-W255C	35 +1	0.351 +0.04	24.9 -3.5	6.6 +0.5	91 -1	close		+
Eminence HL 10	32 -2	0.282 -0.03	29.2 +0.8	5.7 -0.4	88.9 -3.1	close	8 Ω vs 4 Ω: amp load changes · Xmax 5.7 mm < 6.1 mm: lower excursion-limited SPL	+
Pioneer TS-W252PRS	29 -5	0.282 -0.03	30.1 +1.7	7 +0.9	91.1 -0.9	close		+
Faital PRO 10RS430 vp B184423	36.3 +2.3	0.293 -0.01	43 +14.6	7 +0.9	91 -1	usable	8 Ω vs 4 Ω: amp load changes	+
Faital PRO 10RS350	40 +6	0.31 =	40.6 +12.2	7.17 +1.07	91 -1	usable		+
Dayton Audio TS280D-4 TITANIC MK 4	29.6 -4.4	0.37 +0.06	27.8 -0.6	6.4 +0.3	88.4 -3.6	usable		+
SICA 10 S 3 CP 8 Ohms	48 +14	0.323 +0.02	32.4 +4	6.1 =	94 +2	usable	8 Ω vs 4 Ω: amp load changes	+
Mivoc AWM 104	31 -3	0.26 -0.05	37 +8.6	5.2 -0.9	92.2 +0.2	usable	220 W vs 300 W: lower power handling · Xmax 5.2 mm < 6.1 mm: lower excursion-limited SPL	+
Infinity KAPPA PERFECT 10D VQ31	25.1 -8.9	0.301 -0.01	37.7 +9.3	8.4 +2.3	91.7 -0.3	usable	2 Ω vs 4 Ω: amp load changes	+

Compare the closest 3 against the CA-1060/4 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.