Magnat XTC300
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 4 Ω |
| Fs | 30 Hz |
| Qts | 0.317 |
| Qes | 0.33 |
| Qms | 8 |
| Vas | 81 L |
| Sd | 510 cm² |
| Xmax | 6.9 mm |
| Re | 3.5 Ω |
| Bl | 15.9 T·m |
| Mms | 126.7 g |
| Pe | 300 W |
| Sensitivity | 93.8 dB |
Alignment hint
| EBP | 91 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 20.4 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Focal 13W 8711 | 28.8 -1.2 | 0.328 +0.01 | 87.1 +6.1 | 7.9 +1 | 93.4 -0.4 | close | + | |
| Focal 13W 8711 vp | 28.8 -1.2 | 0.328 +0.01 | 87.1 +6.1 | 7.9 +1 | 93.4 -0.4 | close | + | |
| Atohm D300P04 v2008 | 29.7 -0.3 | 0.352 +0.03 | 83.2 +2.2 | 6.4 -0.5 | 93.2 -0.6 | close | 200 W vs 300 W: lower power handling · Xmax 6.4 mm < 6.9 mm: lower excursion-limited SPL | + |
| Atohm D300P04 v2019 | 29.7 -0.3 | 0.352 +0.03 | 83.2 +2.2 | 6.4 -0.5 | 93.2 -0.6 | close | 200 W vs 300 W: lower power handling · Xmax 6.4 mm < 6.9 mm: lower excursion-limited SPL | + |
| BMS 12N630 | 28.6 -1.4 | 0.33 +0.01 | 85.5 +4.5 | 8 +1.1 | 96 +2.2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Auditor RIP 300P | 28.9 -1.1 | 0.35 +0.03 | 79.3 -1.7 | 8.8 +1.9 | 92.6 -1.2 | close | + | |
| BMS 12S330 v2018 | 28.6 -1.4 | 0.295 -0.02 | 81.4 +0.4 | 8 +1.1 | 91.1 -2.7 | close | 8 Ω vs 4 Ω: amp load changes | + |
| PHL Audio 4020 | 29 -1 | 0.299 -0.02 | 92 +11 | 7 +0.1 | 92.1 -1.7 | close | 8 Ω vs 4 Ω: amp load changes | + |
| SICA 12 SR 3 PL vp | 28.7 -1.3 | 0.317 = | 101.2 +20.2 | 7 +0.1 | 92.4 -1.4 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Focal 33WX | 32.5 +2.5 | 0.349 +0.03 | 73.1 -7.9 | 7.1 +0.2 | 94.2 +0.4 | close | + |
Compare the closest 3 against the XTC300 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.