LaVoce WSN102.50

10" · 8 Ω · 300 W · 97.5 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	76 Hz
Qts	0.39
Qes	0.43
Qms	4.85
Vas	20.71 L
Sd	350 cm²
Xmax	2.9 mm
Re	4.9 Ω
Bl	14.05 T·m
Mms	36.05 g
Pe	300 W
Sensitivity	97.5 dB

Alignment hint

EBP	177 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 9.1 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
B&C 10CLA64	72 -4	0.41 +0.02	21 +0.29	4.5 +1.6	96 -1.5	close	16 Ω vs 8 Ω: amp load changes	+
B&C 10 NDL 64 vp	71 -5	0.361 -0.03	19 -1.71	3.1 +0.2	95.9 -1.6	close		+
B&C 10 CLA 64	74 -2	0.422 +0.03	18.5 -2.21	3 +0.1	95.2 -2.3	close		+
LaVoce WAN102.50	78 +2	0.35 -0.04	22.4 +1.69	5.1 +2.2	97 -0.5	close		+
Celestion TF 1020 v2019	79 +3	0.386 =	22.1 +1.39	2 -0.9	97.6 +0.1	close	150 W vs 300 W: lower power handling · Xmax 2 mm < 2.9 mm: lower excursion-limited SPL	+
P.Audio SN-10MB	70 -6	0.397 +0.01	19 -1.71	5 +2.1	95.6 -1.9	close		+
Faital PRO 10FH530	67 -9	0.39 =	20.2 -0.51	7.45 +4.55	96 -1.5	close	16 Ω vs 8 Ω: amp load changes	+
B&C 10CLA64	74 -2	0.42 +0.03	18.5 -2.21	5 +2.1	96 -1.5	close		+
LaVoce WAN102.50-16	76 =	0.43 +0.04	24.11 +3.4	5.5 +2.6	97 -0.5	close	16 Ω vs 8 Ω: amp load changes	+
18 Sound 10NTLW2500	66 -10	0.39 =	20.9 +0.19	7.6 +4.7	96 -1.5	close	16 Ω vs 8 Ω: amp load changes	+

Compare the closest 3 against the WSN102.50 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.