LaVoce WSF102.50
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 64 Hz |
| Qts | 0.335 |
| Qes | 0.35 |
| Qms | 8 |
| Vas | 29 L |
| Sd | 345 cm² |
| Xmax | 3.9 mm |
| Re | 5.5 Ω |
| Bl | 15 T·m |
| Mms | 35.6 g |
| Pe | 250 W |
| Sensitivity | 97 dB |
Alignment hint
| EBP | 183 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 8.4 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| 18 Sound 10NMB420 | 65 +1 | 0.33 -0.01 | 30 +1 | 4 +0.1 | 99 +2 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 10HX230 | 65 +1 | 0.348 +0.01 | 25.8 -3.2 | 4 +0.1 | 96.6 -0.4 | close | + | |
| Eminence DELTA 10 | 66 +2 | 0.332 = | 30.5 +1.5 | 3.5 -0.4 | 97.7 +0.7 | close | Xmax 3.5 mm < 3.9 mm: lower excursion-limited SPL | + |
| Eminence DELTA 10 A | 66 +2 | 0.332 = | 30.5 +1.5 | 3.5 -0.4 | 97.7 +0.7 | close | Xmax 3.5 mm < 3.9 mm: lower excursion-limited SPL | + |
| 18 Sound 10MB600 | 64 = | 0.33 -0.01 | 27.6 -1.4 | 6.5 +2.6 | 98 +1 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 10PR310 8 Ohms | 60 -4 | 0.339 = | 28 -1 | 4.6 +0.7 | 95.9 -1.1 | close | + | |
| LaVoce WAF102.51 | 66 +2 | 0.346 +0.01 | 26 -3 | 4.4 +0.5 | 96.6 -0.4 | close | + | |
| Celestion BN10-300X8 | 64.3 +0.3 | 0.382 +0.05 | 28.8 -0.2 | 4 +0.1 | 95.8 -1.2 | close | + | |
| B&C 10MBX64-16 | 65 +1 | 0.3 -0.04 | 30 +1 | 4 +0.1 | 95.9 -1.1 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 10PR310 | 60 -4 | 0.34 +0.01 | 32.2 +3.2 | 4.92 +1.02 | 98 +1 | close | + |
Compare the closest 3 against the WSF102.50 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.