LaVoce WSF102.00
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 65 Hz |
| Qts | 0.45 |
| Qes | 0.48 |
| Qms | 5.73 |
| Vas | 34.03 L |
| Sd | 350 cm² |
| Xmax | 5.2 mm |
| Re | 5.2 Ω |
| Bl | 11.62 T·m |
| Mms | 30.4 g |
| Pe | 175 W |
| Sensitivity | 97 dB |
Alignment hint
| EBP | 135 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 23.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Radian CRS1030 | 65 = | 0.472 +0.02 | 35.3 +1.27 | 5.5 +0.3 | 96.2 -0.8 | close | + | |
| Faital PRO 10PR300 | 65 = | 0.48 +0.03 | 30.6 -3.43 | 4.92 -0.28 | 97 = | close | 16 Ω vs 8 Ω: amp load changes · Xmax 4.92 mm < 5.2 mm: lower excursion-limited SPL | + |
| Faital PRO 10PR310 | 65 = | 0.47 +0.02 | 29 -5.03 | 4.92 -0.28 | 97 = | close | 16 Ω vs 8 Ω: amp load changes · Xmax 4.92 mm < 5.2 mm: lower excursion-limited SPL | + |
| Faital PRO 10FE400 | 60 -5 | 0.47 +0.02 | 35.3 +1.27 | 5.42 +0.22 | 96 -1 | close | + | |
| LaVoce FBASS10-18 | 65 = | 0.43 -0.02 | 32.4 -1.63 | 4.5 -0.7 | 96 -1 | close | Xmax 4.5 mm < 5.2 mm: lower excursion-limited SPL | + |
| Eminence DELTA-10A-2 | 69.7 +4.7 | 0.44 -0.01 | 29.73 -4.3 | 6.39 +1.19 | 96.7 -0.3 | close | + | |
| Faital PRO 10FE400 | 60 -5 | 0.41 -0.04 | 33.6 -0.43 | 5.62 +0.42 | 95 -2 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Celestion K10-200E | 67 +2 | 0.471 +0.02 | 37 +2.97 | 4 -1.2 | 97.3 +0.3 | close | Xmax 4 mm < 5.2 mm: lower excursion-limited SPL | + |
| Ciare CMI 250 ND | 59 -6 | 0.496 +0.05 | 34 -0.03 | 4.5 -0.7 | 97.5 +0.5 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 4.5 mm < 5.2 mm: lower excursion-limited SPL | + |
| Celestion BN10-300X | 64.2 -0.8 | 0.432 -0.02 | 29.2 -4.83 | 4 -1.2 | 96.9 -0.1 | close | Xmax 4 mm < 5.2 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the WSF102.00 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.