LaVoce WSF051.02
Thiele-Small parameters
| Nominal size | 5" |
|---|---|
| Impedance | 8 Ω |
| Fs | 106 Hz |
| Qts | 0.6 |
| Qes | 0.66 |
| Qms | 7.02 |
| Vas | 3.26 L |
| Sd | 86 cm² |
| Xmax | 3.1 mm |
| Re | 5.6 Ω |
| Bl | 6.4 T·m |
| Mms | 7.26 g |
| Pe | 60 W |
| Sensitivity | 91.5 dB |
Alignment hint
| EBP | 161 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 8.4 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Sica 5 N 1.5 PL | 110.6 +4.6 | 0.56 -0.04 | 3 -0.26 | 3 -0.1 | 91 -0.5 | close | Xmax 3 mm < 3.1 mm: lower excursion-limited SPL | + |
| LaVoce WSF051.02-16 | 98 -8 | 0.66 +0.06 | 4.02 +0.76 | 3.2 +0.1 | 90.5 -1 | close | 16 Ω vs 8 Ω: amp load changes | + |
| BMS 5S117 | 95 -11 | 0.42 -0.18 | 3.25 -0.01 | 5 +1.9 | 91 -0.5 | usable | 16 Ω vs 8 Ω: amp load changes | + |
| BMS 5N160 | 113 +7 | 0.43 -0.17 | 2.57 -0.69 | 5 +1.9 | 91 -0.5 | usable | 16 Ω vs 8 Ω: amp load changes | + |
| Sica 5 D 1 CS | 79 -27 | 0.52 -0.08 | 5.5 +2.24 | 3 -0.1 | 90 -1.5 | usable | Xmax 3 mm < 3.1 mm: lower excursion-limited SPL | + |
| Eminence ALPHA 5-8 | 87 -19 | 0.54 -0.06 | 6.14 +2.88 | 5.92 +2.82 | 89.4 -2.1 | usable | + | |
| Faital PRO 5PR160 | 90 -16 | 0.31 -0.29 | 3.7 +0.44 | 5.1 +2 | 92 +0.5 | risky | + | |
| B&C 5NDL38 | 80 -26 | 0.36 -0.24 | 4.3 +1.04 | 3.5 +0.4 | 91 -0.5 | risky | + | |
| Beyma 5G40Nd/N | 140 +34 | 0.45 -0.15 | 1.4 -1.86 | 3 -0.1 | 92 +0.5 | risky | Xmax 3 mm < 3.1 mm: lower excursion-limited SPL | + |
| B&C 5FG44 | 70 -36 | 0.39 -0.21 | 5.1 +1.84 | 3 -0.1 | 90 -1.5 | risky | 16 Ω vs 8 Ω: amp load changes · Xmax 3 mm < 3.1 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the WSF051.02 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.