LaVoce WSF051.02-16
Thiele-Small parameters
| Nominal size | 5" |
|---|---|
| Impedance | 16 Ω |
| Fs | 98 Hz |
| Qts | 0.66 |
| Qes | 0.74 |
| Qms | 6.54 |
| Vas | 4.02 L |
| Sd | 86 cm² |
| Xmax | 3.2 mm |
| Re | 11.9 Ω |
| Bl | 8.27 T·m |
| Mms | 6.9 g |
| Pe | 60 W |
| Sensitivity | 90.5 dB |
Alignment hint
| EBP | 132 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 27.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| LaVoce WSF051.02 | 106 +8 | 0.6 -0.06 | 3.26 -0.76 | 3.1 -0.1 | 91.5 +1 | usable | 8 Ω vs 16 Ω: amp load changes · Xmax 3.1 mm < 3.2 mm: lower excursion-limited SPL | + |
| Sica 5 N 1.5 PL | 110.6 +12.6 | 0.56 -0.1 | 3 -1.02 | 3 -0.2 | 91 +0.5 | usable | 8 Ω vs 16 Ω: amp load changes · Xmax 3 mm < 3.2 mm: lower excursion-limited SPL | + |
| Sica 5 D 1 CS | 79 -19 | 0.52 -0.14 | 5.5 +1.48 | 3 -0.2 | 90 -0.5 | usable | 8 Ω vs 16 Ω: amp load changes · Xmax 3 mm < 3.2 mm: lower excursion-limited SPL | + |
| BMS 5S117 | 95 -3 | 0.42 -0.24 | 3.25 -0.77 | 5 +1.8 | 91 +0.5 | usable | + | |
| Eminence ALPHA 5-8 | 87 -11 | 0.54 -0.12 | 6.14 +2.12 | 5.92 +2.72 | 89.4 -1.1 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| B&C 5NDL38 | 80 -18 | 0.36 -0.3 | 4.3 +0.28 | 3.5 +0.3 | 91 +0.5 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| BMS 5N160 | 113 +15 | 0.43 -0.23 | 2.57 -1.45 | 5 +1.8 | 91 +0.5 | usable | + | |
| Faital PRO 5PR160 | 90 -8 | 0.31 -0.35 | 3.7 -0.32 | 5.1 +1.9 | 92 +1.5 | risky | 8 Ω vs 16 Ω: amp load changes | + |
| Faital PRO 5FE120 | 65 -33 | 0.48 -0.18 | 5.4 +1.38 | 5.25 +2.05 | 88 -2.5 | risky | 8 Ω vs 16 Ω: amp load changes | + |
| Faital PRO 5FE125 | 65 -33 | 0.48 -0.18 | 5.4 +1.38 | 5.25 +2.05 | 88 -2.5 | risky | 8 Ω vs 16 Ω: amp load changes | + |
Compare the closest 3 against the WSF051.02-16 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.