LaVoce WAN103.01-16

10" · 16 Ω · 450 W · 98 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	16 Ω
Fs	70 Hz
Qts	0.28
Qes	0.3
Qms	3.99
Vas	21.5 L
Sd	350 cm²
Xmax	5 mm
Re	10.6 Ω
Bl	25.52 T·m
Mms	41.5 g
Pe	450 W
Sensitivity	98 dB

Alignment hint

EBP	233 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 4 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
B&C 10NW76	68 -2	0.29 +0.01	18.5 -3	7 +2	96.8 -1.2	close		+
Beyma 10MC500	65 -5	0.29 +0.01	24 +2.5	8 +3	97 -1	close	8 Ω vs 16 Ω: amp load changes	+
18 Sound 10NTLW2500	61 -9	0.27 -0.01	22 +0.5	7.6 +2.6	96.5 -1.5	close	4 Ω vs 16 Ω: amp load changes	+
Oberton 10MB300	64.7 -5.3	0.244 -0.04	22.75 +1.25	5.25 +0.25	99 +1	close	8 Ω vs 16 Ω: amp load changes	+
B&C 10CXN64	68 -2	0.31 +0.03	23 +1.5	5.5 +0.5	95.2 -2.8	close	8 Ω vs 16 Ω: amp load changes · 250 W vs 450 W: lower power handling	+
B&C 10CL64	63 -7	0.31 +0.03	22.2 +0.7	5.2 +0.2	96 -2	close	8 Ω vs 16 Ω: amp load changes · 250 W vs 450 W: lower power handling	+
LaVoce WAN103.01	70 =	0.22 -0.06	22.29 +0.79	5 =	99 +1	close	8 Ω vs 16 Ω: amp load changes	+
Faital PRO 10FH520	60 -10	0.29 +0.01	23.5 +2	7.25 +2.25	97 -1	close	8 Ω vs 16 Ω: amp load changes	+
B&C 10CLA76	71 +1	0.29 +0.01	16.4 -5.1	6.5 +1.5	96.5 -1.5	close	8 Ω vs 16 Ω: amp load changes	+
B&C 10NW64	59 -11	0.26 -0.02	22 +0.5	6 +1	96 -2	close	8 Ω vs 16 Ω: amp load changes · 300 W vs 450 W: lower power handling	+

Compare the closest 3 against the WAN103.01-16 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.