← all drivers

LaVoce WAN102.50LD

10" · 8 Ω · 300 W · 91.5 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance8 Ω
Fs52 Hz
Qts0.4
Qes0.42
Qms7.84
Vas23.88 L
Sd350 cm²
Xmax11.5 mm
Re7.3 Ω
Bl19.64 T·m
Mms67.6 g
Pe300 W
Sensitivity91.5 dB

Alignment hint

EBP124 · ported
Sealed Vb (Qtc ≈ 0.71)≈ 11.2 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Lavoce WAN103.0048 -40.35 -0.0526 +2.129.6 -1.990.7 -0.8usableXmax 9.6 mm < 11.5 mm: lower excursion-limited SPL+
Gladen SQX 1038.8 -13.20.39 -0.0124.5 +0.6210 -1.587.1 -4.4usable4 Ω vs 8 Ω: amp load changes · Xmax 10 mm < 11.5 mm: lower excursion-limited SPL+
LaVoce SSF102.50L50 -20.475 +0.0725.6 +1.725.7 -5.891.4 -0.1usableXmax 5.7 mm < 11.5 mm: lower excursion-limited SPL+
Hertz Audio HX 25037 -150.44 +0.0424 +0.1214 +2.585.8 -5.7usable4 Ω vs 8 Ω: amp load changes+
Faital PRO 10FH52065 +130.41 +0.0122.7 -1.187 -4.596 +4.5usable16 Ω vs 8 Ω: amp load changes · Xmax 7 mm < 11.5 mm: lower excursion-limited SPL+
18 Sound 10NTLW250066 +140.39 -0.0120.9 -2.987.6 -3.996 +4.5usable16 Ω vs 8 Ω: amp load changes · Xmax 7.6 mm < 11.5 mm: lower excursion-limited SPL+
Gladen SQX1038.8 -13.20.387 -0.0124.5 +0.625 -6.591.3 -0.2usable4 Ω vs 8 Ω: amp load changes · Xmax 5 mm < 11.5 mm: lower excursion-limited SPL+
Faital PRO 10FH53067 +150.39 -0.0120.2 -3.687.45 -4.0596 +4.5usable16 Ω vs 8 Ω: amp load changes · Xmax 7.45 mm < 11.5 mm: lower excursion-limited SPL+
Faital PRO 10FH52060 +80.32 -0.0822.7 -1.187.25 -4.2595 +3.5usable4 Ω vs 8 Ω: amp load changes · Xmax 7.25 mm < 11.5 mm: lower excursion-limited SPL+
Faital PRO 10FH50065 +130.42 +0.0219.2 -4.687.25 -4.2595 +3.5usable16 Ω vs 8 Ω: amp load changes · Xmax 7.25 mm < 11.5 mm: lower excursion-limited SPL+

Compare the closest 3 against the WAN102.50LD →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.