LaVoce WAN082.02
Thiele-Small parameters
| Nominal size | 8" |
|---|---|
| Impedance | 8 Ω |
| Fs | 80 Hz |
| Qts | 0.23 |
| Qes | 0.25 |
| Qms | 4.88 |
| Vas | 8.97 L |
| Sd | 220 cm² |
| Xmax | 5.8 mm |
| Re | 5.2 Ω |
| Bl | 17.76 T·m |
| Mms | 29.9 g |
| Pe | 200 W |
| Sensitivity | 96.5 dB |
Alignment hint
| EBP | 320 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 1.1 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| LaVoce WAF082.01 | 76 -4 | 0.21 -0.02 | 10.21 +1.24 | 5.8 = | 97 +0.5 | close | + | |
| B&C 8NW51 | 76 -4 | 0.25 +0.02 | 10.6 +1.63 | 6 +0.2 | 97 +0.5 | close | 4 Ω vs 8 Ω: amp load changes | + |
| B&C 8NDL64 | 80 = | 0.25 +0.02 | 9.6 +0.63 | 4.5 -1.3 | 97 +0.5 | close | Xmax 4.5 mm < 5.8 mm: lower excursion-limited SPL | + |
| B&C 8FW51 | 74 -6 | 0.21 -0.02 | 12 +3.03 | 6 +0.2 | 97 +0.5 | usable | + | |
| LaVoce WAN082.01 | 85 +5 | 0.32 +0.09 | 9 +0.03 | 5.8 = | 96 -0.5 | usable | + | |
| Oberton 8NMB250v4 | 82.03 +2.03 | 0.258 +0.03 | 10.89 +1.92 | 4.5 -1.3 | 96 -0.5 | usable | Xmax 4.5 mm < 5.8 mm: lower excursion-limited SPL | + |
| 18 Sound 8NMB750 | 88 +8 | 0.27 +0.04 | 6.9 -2.07 | 6.1 +0.3 | 96.5 = | usable | + | |
| B&C 8CLA64 | 71 -9 | 0.24 +0.01 | 12.5 +3.53 | 5.3 -0.5 | 96 -0.5 | usable | Xmax 5.3 mm < 5.8 mm: lower excursion-limited SPL | + |
| B&C 8NDL64 | 73 -7 | 0.24 +0.01 | 11.8 +2.83 | 4.5 -1.3 | 97 +0.5 | usable | 16 Ω vs 8 Ω: amp load changes · Xmax 4.5 mm < 5.8 mm: lower excursion-limited SPL | + |
| 18 Sound 8NTLW2000 | 74 -6 | 0.26 +0.03 | 11.3 +2.33 | 4.4 -1.4 | 96.5 = | usable | 16 Ω vs 8 Ω: amp load changes · Xmax 4.4 mm < 5.8 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the WAN082.02 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.