LaVoce WAF102.52
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 66 Hz |
| Qts | 0.412 |
| Qes | 0.44 |
| Qms | 6.4 |
| Vas | 23.5 L |
| Sd | 346 cm² |
| Xmax | 4.5 mm |
| Re | 4.9 Ω |
| Bl | 13.8 T·m |
| Mms | 41.5 g |
| Pe | 350 W |
| Sensitivity | 96 dB |
Alignment hint
| EBP | 150 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 12.1 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 10FH520 | 65 -1 | 0.41 = | 22.7 -0.8 | 7 +2.5 | 96 = | close | 16 Ω vs 8 Ω: amp load changes | + |
| B&C 10 FCX 64 | 63 -3 | 0.417 +0.01 | 25 +1.5 | 4.4 -0.1 | 95.1 -0.9 | close | 250 W vs 350 W: lower power handling · Xmax 4.4 mm < 4.5 mm: lower excursion-limited SPL | + |
| B&C 10CLA64 | 72 +6 | 0.41 = | 21 -2.5 | 4.5 = | 96 = | close | 16 Ω vs 8 Ω: amp load changes · 250 W vs 350 W: lower power handling | + |
| 18 Sound 10W650 | 64 -2 | 0.41 = | 27 +3.5 | 5.7 +1.2 | 96 = | close | 16 Ω vs 8 Ω: amp load changes · 250 W vs 350 W: lower power handling | + |
| 18 Sound 10NTLW2500 | 66 = | 0.39 -0.02 | 20.9 -2.6 | 7.6 +3.1 | 96 = | close | 16 Ω vs 8 Ω: amp load changes | + |
| BMS 10C262 | 65 -1 | 0.368 -0.04 | 25.5 +2 | 5.1 +0.6 | 95.7 -0.3 | close | + | |
| Faital PRO 10FH530 | 67 +1 | 0.39 -0.02 | 20.2 -3.3 | 7.45 +2.95 | 96 = | close | 16 Ω vs 8 Ω: amp load changes | + |
| LaVoce WAN102.50-16 | 76 +10 | 0.43 +0.02 | 24.11 +0.61 | 5.5 +1 | 97 +1 | close | 16 Ω vs 8 Ω: amp load changes | + |
| P.Audio SN-10MB | 70 +4 | 0.397 -0.01 | 19 -4.5 | 5 +0.5 | 95.6 -0.4 | close | + | |
| 18 Sound 10W650 | 67 +1 | 0.48 +0.07 | 26 +2.5 | 5.7 +1.2 | 96 = | close | 250 W vs 350 W: lower power handling | + |
Compare the closest 3 against the WAF102.52 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.