LaVoce WAF102.50A
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 71 Hz |
| Qts | 0.311 |
| Qes | 0.33 |
| Qms | 5.3 |
| Vas | 23.6 L |
| Sd | 347 cm² |
| Xmax | 3.2 mm |
| Re | 5.5 Ω |
| Bl | 16.3 T·m |
| Mms | 35.9 g |
| Pe | 250 W |
| Sensitivity | 97.7 dB |
Alignment hint
| EBP | 215 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 5.7 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 10 CXN 64 | 68 -3 | 0.312 = | 23 -0.6 | 3.5 +0.3 | 96.9 -0.8 | close | + | |
| RCF MB 10G251 | 76 +5 | 0.335 +0.02 | 24 +0.4 | 3.5 +0.3 | 98.6 +0.9 | close | + | |
| Monacor SP-25A/200NEO | 69 -2 | 0.349 +0.04 | 25 +1.4 | 3.1 -0.1 | 97.2 -0.5 | close | Xmax 3.1 mm < 3.2 mm: lower excursion-limited SPL | + |
| B&C 10CXN64 | 68 -3 | 0.31 = | 23 -0.6 | 5.5 +2.3 | 95.2 -2.5 | close | + | |
| Fane STUDIO 10M | 73 +2 | 0.34 +0.03 | 27.2 +3.6 | 3.1 -0.1 | 97.9 +0.2 | close | Xmax 3.1 mm < 3.2 mm: lower excursion-limited SPL | + |
| LaVoce WAN103.01-16 | 70 -1 | 0.28 -0.03 | 21.5 -2.1 | 5 +1.8 | 98 +0.3 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Beyma 10MCS 500 | 65 -6 | 0.31 = | 24 +0.4 | 8 +4.8 | 96.5 -1.2 | close | + | |
| B&C 10CL64 | 63 -8 | 0.31 = | 22.2 -1.4 | 5.2 +2 | 96 -1.7 | close | + | |
| Oberton 10M250 | 76.65 +5.65 | 0.28 -0.03 | 23.05 -0.55 | 2.75 -0.45 | 97 -0.7 | close | Xmax 2.75 mm < 3.2 mm: lower excursion-limited SPL | + |
| Beyma 10MC500 | 65 -6 | 0.29 -0.02 | 24 +0.4 | 8 +4.8 | 97 -0.7 | close | + |
Compare the closest 3 against the WAF102.50A →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.