LaVoce SSF102.50L V2
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 44 Hz |
| Qts | 0.493 |
| Qes | 0.54 |
| Qms | 5.6 |
| Vas | 30.7 L |
| Sd | 350 cm² |
| Xmax | 7.1 mm |
| Re | 5.7 Ω |
| Bl | 14.6 T·m |
| Mms | 73.2 g |
| Pe | 400 W |
| Sensitivity | 90.3 dB |
Alignment hint
| EBP | 81 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 29 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Audison AV10 | 41 -3 | 0.539 +0.05 | 30.7 = | 7 -0.1 | 90.4 +0.1 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 7 mm < 7.1 mm: lower excursion-limited SPL | + |
| LaVoce SSF102.40 | 41 -3 | 0.51 +0.02 | 31.91 +1.21 | 8.3 +1.2 | 89 -1.3 | close | 4 Ω vs 8 Ω: amp load changes · 250 W vs 400 W: lower power handling | + |
| Boss Audio MR101 | 44 = | 0.55 +0.06 | 35 +4.3 | 9 +1.9 | 88.9 -1.4 | close | 4 Ω vs 8 Ω: amp load changes · 300 W vs 400 W: lower power handling | + |
| Clarion PXW1052 | 33.6 -10.4 | 0.505 +0.01 | 30.2 -0.5 | 9.6 +2.5 | 91.4 +1.1 | close | 2 Ω vs 8 Ω: amp load changes | + |
| LaVoce SSF102.50L vp | 48 +4 | 0.544 +0.05 | 26 -4.7 | 6.3 -0.8 | 90.3 = | close | Xmax 6.3 mm < 7.1 mm: lower excursion-limited SPL | + |
| LaVoce SSF102.40 4 Ohms | 43 -1 | 0.56 +0.07 | 30 -0.7 | 5.7 -1.4 | 92.2 +1.9 | close | 4 Ω vs 8 Ω: amp load changes · 250 W vs 400 W: lower power handling · Xmax 5.7 mm < 7.1 mm: lower excursion-limited SPL | + |
| Focal 27 H | 46.6 +2.6 | 0.499 +0.01 | 30.4 -0.3 | 5 -2.1 | 93.7 +3.4 | usable | 4 Ω vs 8 Ω: amp load changes · 200 W vs 400 W: lower power handling · Xmax 5 mm < 7.1 mm: lower excursion-limited SPL | + |
| Audison AV 10 | 41 -3 | 0.54 +0.05 | 30 -0.7 | 14 +6.9 | 86.8 -3.5 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| MTX Audio RT10-04 | 32 -12 | 0.49 = | 32.6 +1.9 | 6.7 -0.4 | 89.1 -1.2 | usable | 4 Ω vs 8 Ω: amp load changes · 250 W vs 400 W: lower power handling · Xmax 6.7 mm < 7.1 mm: lower excursion-limited SPL | + |
| Pyle Audio PLPW10D | 42 -2 | 0.55 +0.06 | 35.6 +4.9 | 6 -1.1 | 91.8 +1.5 | usable | 4 Ω vs 8 Ω: amp load changes · Xmax 6 mm < 7.1 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the SSF102.50L V2 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.