Lavoce SAN215.30
Thiele-Small parameters
| Nominal size | 21" |
|---|---|
| Impedance | 8 Ω |
| Fs | 35 Hz |
| Qts | 0.33 |
| Qes | 0.35 |
| Qms | 6.2 |
| Vas | 200 L |
| Sd | 1661 cm² |
| Xmax | 14.9 mm |
| Re | 8 Ω |
| Bl | 46.8 T·m |
| Mms | 435 g |
| Pe | 2000 W |
| Sensitivity | 95.7 dB |
Alignment hint
| EBP | 100 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 55.7 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| RCF LF21N551 | 35 = | 0.33 = | 200 = | 15 +0.1 | 97 +1.3 | close | + | |
| B&C 21SW152 | 32 -3 | 0.36 +0.03 | 200 = | 15 +0.1 | 96 +0.3 | close | + | |
| B&C 21SW152 | 32 -3 | 0.3 -0.03 | 200 = | 15 +0.1 | 96 +0.3 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Fane Colossus Prime 21XS | 35 = | 0.339 +0.01 | 266 +66 | 14 -0.9 | 97.5 +1.8 | close | 1500 W vs 2000 W: lower power handling · Xmax 14 mm < 14.9 mm: lower excursion-limited SPL | + |
| 18 Sound 21NLW4100 | 34 -1 | 0.4 +0.07 | 219 +19 | 15.2 +0.3 | 97 +1.3 | close | 4 Ω vs 8 Ω: amp load changes · 1500 W vs 2000 W: lower power handling | + |
| B&C 21DS115 | 34 -1 | 0.27 -0.06 | 204 +4 | 16.5 +1.6 | 99 +3.3 | usable | + | |
| Fane Colossus Prime 21NDXL | 33 -2 | 0.36 +0.03 | 241 +41 | 14 -0.9 | 98 +2.3 | usable | 1500 W vs 2000 W: lower power handling · Xmax 14 mm < 14.9 mm: lower excursion-limited SPL | + |
| 18 Sound 21NLW9601 | 37 +2 | 0.29 -0.04 | 175 -25 | 14 -0.9 | 98 +2.3 | usable | Xmax 14 mm < 14.9 mm: lower excursion-limited SPL | + |
| Eminence NSW6021-6 | 29 -6 | 0.31 -0.02 | 224.58 +24.58 | 21 +6.1 | 97 +1.3 | usable | 6 Ω vs 8 Ω: amp load changes | + |
| 18 Sound 21NLW9001 | 32 -3 | 0.31 -0.02 | 244 +44 | 14 -0.9 | 98 +2.3 | usable | Xmax 14 mm < 14.9 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the SAN215.30 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.