LaVoce SAN214.50LD vp
Thiele-Small parameters
| Nominal size | 21.5" |
|---|---|
| Impedance | 8 Ω |
| Fs | 30 Hz |
| Qts | 0.223 |
| Qes | 0.23 |
| Qms | 7 |
| Vas | 250 L |
| Sd | 1661 cm² |
| Xmax | 7.2 mm |
| Re | 5.3 Ω |
| Bl | 43.5 T·m |
| Mms | 435.4 g |
| Pe | 1700 W |
| Sensitivity | 98.4 dB |
Alignment hint
| EBP | 130 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 27.6 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 21 DS 115 | 30 = | 0.234 +0.01 | 269 +19 | 7.6 +0.4 | 98.7 +0.3 | close | + | |
| B&C 21 SW 150 | 29 -1 | 0.261 +0.04 | 254 +4 | 7.5 +0.3 | 99.4 +1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| 18 Sound 21NLW9000C | 29 -1 | 0.248 +0.02 | 257 +7 | 8.1 +0.9 | 100.5 +2.1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Dayton Audio PSS545HE-4 VORTEX | 28.8 -1.2 | 0.27 +0.05 | 212.1 -37.9 | 8.6 +1.4 | 97.8 -0.6 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| B&C 21 DS 115 - 4 | 30 = | 0.196 -0.03 | 274 +24 | 6.9 -0.3 | 103.3 +4.9 | usable | 4 Ω vs 8 Ω: amp load changes · Xmax 6.9 mm < 7.2 mm: lower excursion-limited SPL | + |
| Beyma 21QLEX1600/Fe | 30 = | 0.281 +0.06 | 309 +59 | 8.4 +1.2 | 98.1 -0.3 | usable | + | |
| PD PDN 2151 | 31.4 +1.4 | 0.276 +0.05 | 303.4 +53.4 | 6.7 -0.5 | 99 +0.6 | usable | 1000 W vs 1700 W: lower power handling · Xmax 6.7 mm < 7.2 mm: lower excursion-limited SPL | + |
| Precision Devices PDN 2151 | 31.4 +1.4 | 0.276 +0.05 | 303.4 +53.4 | 6.7 -0.5 | 99 +0.6 | usable | 1000 W vs 1700 W: lower power handling · Xmax 6.7 mm < 7.2 mm: lower excursion-limited SPL | + |
| 18 Sound 21LW400 | 28 -2 | 0.234 +0.01 | 385 +135 | 9.3 +2.1 | 99.5 +1.1 | usable | + | |
| RCF LF 21N451 v2017 | 30 = | 0.259 +0.04 | 375 +125 | 8.6 +1.4 | 99.3 +0.9 | usable | + |
Compare the closest 3 against the SAN214.50LD vp →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.