LaVoce SAF184.50
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 35 Hz |
| Qts | 0.329 |
| Qes | 0.35 |
| Qms | 5.4 |
| Vas | 162 L |
| Sd | 1225 cm² |
| Xmax | 9.2 mm |
| Re | 5.55 Ω |
| Bl | 30.6 T·m |
| Mms | 268.5 g |
| Pe | 1800 W |
| Sensitivity | 96.5 dB |
Alignment hint
| EBP | 100 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 44.8 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| 18 Sound 18NLW4500 | 35 = | 0.33 = | 151 -11 | 15.3 +6.1 | 97 +0.5 | close | + | |
| Celestion CF18VJD | 34.3 -0.7 | 0.336 +0.01 | 150.6 -11.4 | 9 -0.2 | 95.5 -1 | close | Xmax 9 mm < 9.2 mm: lower excursion-limited SPL | + |
| PD PD 1845-1N | 34.1 -0.9 | 0.323 -0.01 | 176 +14 | 9.5 +0.3 | 97.5 +1 | close | + | |
| Precision Devices PD 1845-1N | 34.1 -0.9 | 0.323 -0.01 | 176 +14 | 9.5 +0.3 | 97.5 +1 | close | + | |
| Faital PRO 18HP1030 | 35 = | 0.32 -0.01 | 172.2 +10.2 | 12.45 +3.25 | 98 +1.5 | close | 4 Ω vs 8 Ω: amp load changes · 1200 W vs 1800 W: lower power handling | + |
| Oberton 18NXB700 | 36.24 +1.24 | 0.312 -0.02 | 155.46 -6.54 | 9 -0.2 | 98 +1.5 | close | 1000 W vs 1800 W: lower power handling · Xmax 9 mm < 9.2 mm: lower excursion-limited SPL | + |
| B&C 18SW100 | 36 +1 | 0.36 +0.03 | 160 -2 | 12.5 +3.3 | 96 -0.5 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 18HP1060 | 35 = | 0.33 = | 184.4 +22.4 | 12.45 +3.25 | 98 +1.5 | close | 4 Ω vs 8 Ω: amp load changes · 1200 W vs 1800 W: lower power handling | + |
| 18 Sound 18LW2500 | 34 -1 | 0.335 +0.01 | 135 -27 | 9.1 -0.1 | 96 -0.5 | close | Xmax 9.1 mm < 9.2 mm: lower excursion-limited SPL | + |
| Fane COLOSSUS 18XT5N | 36 +1 | 0.331 = | 185 +23 | 8.4 -0.8 | 97.4 +0.9 | close | 1200 W vs 1800 W: lower power handling · Xmax 8.4 mm < 9.2 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the SAF184.50 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.