LaVoce MAF061.50
Thiele-Small parameters
| Nominal size | 6" |
|---|---|
| Impedance | 8 Ω |
| Fs | 177 Hz |
| Qts | 0.52 |
| Qes | 0.57 |
| Qms | 5.77 |
| Vas | 1.9 L |
| Sd | 132 cm² |
| Xmax | 3.6 mm |
| Re | 5.5 Ω |
| Bl | 10.54 T·m |
| Mms | 10.4 g |
| Pe | 120 W |
| Sensitivity | 96.5 dB |
Alignment hint
| EBP | 311 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 2.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| LaVoce MAN061.80 | 172 -5 | 0.57 +0.05 | 1.59 -0.31 | 3 -0.6 | 94.5 -2 | usable | Xmax 3 mm < 3.6 mm: lower excursion-limited SPL | + |
| Faital PRO 6PR130 | 175 -2 | 0.48 -0.04 | 4.2 +2.3 | 4.6 +1 | 101 +4.5 | usable | + | |
| Eminence BETA-6A | 123 -54 | 0.56 +0.04 | 3.51 +1.61 | 4.5 +0.9 | 94 -2.5 | usable | + | |
| Faital PRO 6FE200 | 120 -57 | 0.67 +0.15 | 3.6 +1.7 | 4.67 +1.07 | 95 -1.5 | risky | + | |
| LaVoce WSN061.52-16 | 108 -69 | 0.53 +0.01 | 4.46 +2.56 | 3.7 +0.1 | 93 -3.5 | risky | 16 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 6FE200 | 120 -57 | 0.66 +0.14 | 4.2 +2.3 | 4.17 +0.57 | 95 -1.5 | risky | 16 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 6FE200 | 120 -57 | 0.42 -0.1 | 4.3 +2.4 | 4.62 +1.02 | 95 -1.5 | risky | 4 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 6FE300 | 100 -77 | 0.46 -0.06 | 4.7 +2.8 | 3.9 +0.3 | 94 -2.5 | risky | + | |
| Sica 6 M 2 CP | 135 -42 | 0.35 -0.17 | 3.5 +1.6 | 2 -1.6 | 96.8 +0.3 | risky | 4 Ω vs 8 Ω: amp load changes · Xmax 2 mm < 3.6 mm: lower excursion-limited SPL | + |
| Faital PRO 6FE400 | 100 -77 | 0.5 -0.02 | 5.5 +3.6 | 4.77 +1.17 | 94 -2.5 | risky | 16 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the MAF061.50 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.