← all drivers

LaVoce DF10.144LK

1" exit · 8 Ω · 35 W · 106 dB · datasheet ↗

Compression driver specs

Throat exit1"
Voice coil35 mm
Impedance8 Ω
Usable range1000-20000 Hz
Min crossover1200 Hz
Sensitivity (on horn)106 dB
Power (AES)35 W

Compatible horns (same exit)

Matched on throat exit (1") only. Verify mounting and crossover against both datasheets.

Substitute candidates

DriverMin XO (Hz)Range low (Hz)Range high (Hz)Voice coil (mm)Sens (dB)FitNotesCompare
LaVoce DF10.144LK1200 =1000 =20000 =35 =106 =close16 Ω vs 8 Ω: amp load changes+
LaVoce DN10.1421200 =1000 =18000 -200036 +1107 +1close16 Ω vs 8 Ω: amp load changes · 25 W vs 35 W: lower power handling+
LaVoce DN10.1421200 =1000 =18000 -200036 +1107 +1close25 W vs 35 W: lower power handling+
B&C DE1111200 =1000 =17000 -300036 +1107 +1close25 W vs 35 W: lower power handling+
B&C DE1111200 =1000 =17000 -300036 +1108.5 +2.5close16 Ω vs 8 Ω: amp load changes · 25 W vs 35 W: lower power handling+
B&C DH3501000 -2001000 =17000 -300036 +1108 +2close4 Ω vs 8 Ω: amp load changes · 15 W vs 35 W: lower power handling+
B&C DH3501000 -2001000 =17000 -300036 +1108 +2close15 W vs 35 W: lower power handling+
B&C DH350H1000 -2001000 =17000 -300036 +1108 +2close4 Ω vs 8 Ω: amp load changes+
B&C DH350H1000 -2001000 =17000 -300036 +1108 +2close+
Faital PRO HF1031300 +1001000 =20000 =44 +9107 +1close16 Ω vs 8 Ω: amp load changes · min crossover 1300 Hz > 1200 Hz: raise the XO+

Compare the closest 3 against the DF10.144LK →

Ranked on parameter similarity only (crossover floor, range, sensitivity, voice coil). Same throat exit required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.