← all drivers

LaVoce DF10.14

1" exit · 16 Ω · 30 W · 106 dB · datasheet ↗

Compression driver specs

Throat exit1"
Voice coil36 mm
Impedance16 Ω
Usable range1500-20000 Hz
Min crossover1700 Hz
Sensitivity (on horn)106 dB
Power (AES)30 W

Compatible horns (same exit)

Matched on throat exit (1") only. Verify mounting and crossover against both datasheets.

Substitute candidates

DriverMin XO (Hz)Range low (Hz)Range high (Hz)Voice coil (mm)Sens (dB)FitNotesCompare
LaVoce DF10.141700 =1500 =20000 =36 =106 =close8 Ω vs 16 Ω: amp load changes+
LaVoce DN10.141700 =1500 =20000 =36 =107 +1close+
LaVoce DN10.141700 =1500 =20000 =36 =107 +1close8 Ω vs 16 Ω: amp load changes+
Faital PRO HF1051700 =1400 -10020000 =37 +1107 +1close+
Faital PRO HF1051700 =1400 -10020000 =37 +1107 +1close8 Ω vs 16 Ω: amp load changes+
Faital PRO HF1041700 =1500 =20000 =37 +1108 +2close+
Faital PRO HF1041700 =1500 =20000 =37 +1108 +2close8 Ω vs 16 Ω: amp load changes+
Sica CD 120.44/640 T1600 -1001600 +10020000 =44 +8106.3 +0.3close8 Ω vs 16 Ω: amp load changes+
Sica CD 95.44/N240 T1600 -1001600 +10020000 =44 +8106.3 +0.3close8 Ω vs 16 Ω: amp load changes+
Celestion CDX1-14122000 +3001500 =20000 =35 -1106 =close8 Ω vs 16 Ω: amp load changes · min crossover 2000 Hz > 1700 Hz: raise the XO+

Compare the closest 3 against the DF10.14 →

Ranked on parameter similarity only (crossover floor, range, sensitivity, voice coil). Same throat exit required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.