Kenwood KFC-WPS1200F
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 4 Ω |
| Fs | 24.8 Hz |
| Qts | 0.544 |
| Qes | 0.67 |
| Qms | 2.897 |
| Vas | 62.685 L |
| Sd | 490 cm² |
| Xmax | 8.5 mm |
| Re | 3.21 Ω |
| Bl | 12.93 T·m |
| Mms | 224 g |
| Pe | 350 W |
| Sensitivity | 91 dB |
Alignment hint
| EBP | 37 · sealed |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 90.9 L |
EBP < 50: favours a sealed (closed) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| JL Audio 13TW5V2-2 | 27.6 +2.8 | 0.526 -0.02 | 60.3 -2.39 | 9 +0.5 | 89.2 -1.8 | close | + | |
| Boston Acoustics G21244 | 28 +3.2 | 0.579 +0.03 | 65 +2.31 | 8.2 -0.3 | 92.4 +1.4 | close | 2 Ω vs 4 Ω: amp load changes · Xmax 8.2 mm < 8.5 mm: lower excursion-limited SPL | + |
| Wavecor SW310WA02 | 27.5 +2.7 | 0.52 -0.02 | 64.5 +1.81 | 7.4 -1.1 | 89.9 -1.1 | close | 250 W vs 350 W: lower power handling · Xmax 7.4 mm < 8.5 mm: lower excursion-limited SPL | + |
| MTX Audio RT12-04 | 28 +3.2 | 0.535 -0.01 | 68 +5.31 | 7.5 -1 | 90.1 -0.9 | close | 250 W vs 350 W: lower power handling · Xmax 7.5 mm < 8.5 mm: lower excursion-limited SPL | + |
| Dayton Audio TIT320C-4 Titanic Mk III | 24.9 +0.1 | 0.458 -0.09 | 64.3 +1.61 | 10.5 +2 | 89.2 -1.8 | close | + | |
| Kenwood KFC-XW1200F | 24.8 = | 0.544 = | 62.69 = | 8.5 = | 83.4 -7.6 | close | + | |
| JL Audio 12W7AE-3 | 27.2 +2.4 | 0.482 -0.06 | 66 +3.31 | 13.7 +5.2 | 91.2 +0.2 | close | + | |
| Rockford Fosgate P3D2-12 | 26.5 +1.7 | 0.491 -0.05 | 57.7 -4.98 | 9.5 +1 | 89 -2 | close | + | |
| Oxygen AIR2 300 | 26.7 +1.9 | 0.452 -0.09 | 62.9 +0.21 | 8.8 +0.3 | 89.5 -1.5 | close | + | |
| Rockford Fosgate T1D212 | 28 +3.2 | 0.522 -0.02 | 55.8 -6.89 | 10.9 +2.4 | 89.1 -1.9 | close | + |
Compare the closest 3 against the KFC-WPS1200F →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.