← all drivers

Kenwood KFC-W3002

12" · 4 Ω · 150 W · 91.1 dB · datasheet ↗

Thiele-Small parameters

Nominal size12"
Impedance4 Ω
Fs35 Hz
Qts0.594
Qes0.63
Qms10.3
Vas53.8 L
Sd515 cm²
Xmax2.8 mm
Re3.6 Ω
Bl13.4 T·m
Mms142.9 g
Pe150 W
Sensitivity91.1 dB

Alignment hint

EBP56 · flexible
Sealed Vb (Qtc ≈ 0.71)≈ 129 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Peerless SBS-300F38CP01-0436 +10.611 +0.0255.8 +25.9 +3.190.9 -0.2close+
Focal R-300S32.6 -2.40.582 -0.0153.9 +0.16 +3.289.6 -1.5close+
Kenwood W1024DB33 -20.567 -0.0351.3 -2.56.9 +4.191 -0.1close+
Scan-Speak 30W/4552-0134 -10.525 -0.0752.9 -0.96.6 +3.890.7 -0.4close+
hertz Hertz Audio ES300.535 =0.66 +0.0748.5 -5.36.8 +490.8 -0.3close+
MTX Audio RTS12-0433.5 -1.50.631 +0.0458.4 +4.65.8 +389.5 -1.6close+
JBL S2-122432.4 -2.60.581 -0.0159.7 +5.95.3 +2.589.1 -2close8 Ω vs 4 Ω: amp load changes+
Hertz Audio ES F30.538 +30.6 +0.0160 +6.26 +3.288.6 -2.5close+
Carpower PULSAR-30034 -10.528 -0.0765.7 +11.94 +1.292.4 +1.3usable+
MTX Audio XT12-0433 -20.56 -0.0366 +12.26.5 +3.791.7 +0.6usable+

Compare the closest 3 against the KFC-W3002 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.