JL Audio 10W1V3-4
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 4 Ω |
| Fs | 26.15 Hz |
| Qts | 0.446 |
| Qes | 0.475 |
| Qms | 7.243 |
| Vas | 43.41 L |
| Sd | 346 cm² |
| Xmax | 11 mm |
| Re | 3.902 Ω |
| Bl | 13.98 T·m |
| Mms | 144.7 g |
| Pe | 300 W |
| Sensitivity | 84.2 dB |
Alignment hint
| EBP | 55 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 28.7 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| JL Audio 10W1V3-2 | 25.23 -0.92 | 0.436 -0.01 | 44.15 +0.74 | 11 = | 83.9 -0.3 | close | 2 Ω vs 4 Ω: amp load changes | + |
| JL Audio 10W1V2-8 | 26.5 +0.35 | 0.438 -0.01 | 49.1009 +5.69 | 9.906 -1.09 | 84.7 +0.5 | close | 8 Ω vs 4 Ω: amp load changes · Xmax 9.906 mm < 11 mm: lower excursion-limited SPL | + |
| Dayton Audio RSS265HF-4 v2012 | 26.2 +0.05 | 0.441 -0.01 | 45 +1.59 | 9.4 -1.6 | 87.8 +3.6 | close | Xmax 9.4 mm < 11 mm: lower excursion-limited SPL | + |
| Wavecor SW263WA01 | 24 -2.15 | 0.44 -0.01 | 40.5 -2.91 | 8.7 -2.3 | 84 -0.2 | close | 8 Ω vs 4 Ω: amp load changes · 200 W vs 300 W: lower power handling · Xmax 8.7 mm < 11 mm: lower excursion-limited SPL | + |
| Wavecor SW263WA03 | 24 -2.15 | 0.44 -0.01 | 40.5 -2.91 | 8.7 -2.3 | 84 -0.2 | close | 8 Ω vs 4 Ω: amp load changes · 200 W vs 300 W: lower power handling · Xmax 8.7 mm < 11 mm: lower excursion-limited SPL | + |
| Infinity KAPPA PERFECT 10.1 | 28.35 +2.2 | 0.42 -0.03 | 38.511 -4.9 | 14.15 +3.15 | 84.8 +0.6 | close | + | |
| JL Audio 10WXV2-4 | 29.38 +3.23 | 0.45 = | 47 +3.59 | 10 -1 | 86.06 +1.86 | close | 200 W vs 300 W: lower power handling · Xmax 10 mm < 11 mm: lower excursion-limited SPL | + |
| Dayton Audio UM10-22 10 | 26.2 +0.05 | 0.458 +0.01 | 35.1 -8.31 | 10.9 -0.1 | 86.9 +2.7 | close | Xmax 10.9 mm < 11 mm: lower excursion-limited SPL | + |
| RE Audio REX 10 S4 | 24.35 -1.8 | 0.45 = | 57.2278 +13.82 | 15 +4 | 84.1 -0.1 | close | 200 W vs 300 W: lower power handling | + |
| JL Audio 10W1V2-4 | 25.2 -0.95 | 0.405 -0.04 | 50.4601 +7.05 | 9.906 -1.09 | 84.6 +0.4 | close | Xmax 9.906 mm < 11 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 10W1V3-4 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.