← all drivers

JL Audio 10W1V2-4

10" · 4 Ω · 300 W · 84.6 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance4 Ω
Fs25.2 Hz
Qts0.405
Qes0.432
Qms6.336
Vas50.4601 L
Sd535 cm²
Xmax9.906 mm
Re4.09 Ω
Bl21.93 T·m
Mms320.7 g
Pe300 W
Sensitivity84.6 dB

Alignment hint

EBP58 · flexible
Sealed Vb (Qtc ≈ 0.71)≈ 24.6 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
JL Audio 10W1V2-826.5 +1.30.438 +0.0349.1009 -1.369.906 =84.7 +0.1close8 Ω vs 4 Ω: amp load changes+
JL Audio 10W1V3-225.23 +0.030.436 +0.0344.15 -6.3111 +1.0983.9 -0.7close2 Ω vs 4 Ω: amp load changes+
Dayton Audio RSS265HF-8 v201824.9 -0.30.485 +0.0852.5 +2.049.4 -0.5184.3 -0.3close8 Ω vs 4 Ω: amp load changes · Xmax 9.4 mm < 9.906 mm: lower excursion-limited SPL+
JL Audio 10W1V3-426.15 +0.950.446 +0.0443.41 -7.0511 +1.0984.2 -0.4close+
Dayton Audio RSS265HF-824.9 -0.30.497 +0.0951.6 +1.149.4 -0.5184.3 -0.3close8 Ω vs 4 Ω: amp load changes · Xmax 9.4 mm < 9.906 mm: lower excursion-limited SPL+
SEAS L26ROY-XM001-04 v201825 -0.20.417 +0.0156 +5.549.7 -0.2188.7 +4.1closeXmax 9.7 mm < 9.906 mm: lower excursion-limited SPL+
RE Audio REX 10 S424.35 -0.850.45 +0.0457.2278 +6.7715 +5.0984.1 -0.5close200 W vs 300 W: lower power handling+
CSS Audio SDX1026 +0.80.421 +0.0253 +2.5416.2 +6.2988.5 +3.9close+
Dayton Audio RSS265HF-4 v202225.6 +0.40.452 +0.0554 +3.5410.5 +0.5988.3 +3.7close+
Dayton Audio RSS265HF-4 V201525.6 +0.40.452 +0.0554 +3.549.4 -0.5187.9 +3.3closeXmax 9.4 mm < 9.906 mm: lower excursion-limited SPL+

Compare the closest 3 against the 10W1V2-4 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.