JL Audio 10TW3-D4

10" · 16 Ω · 400 W · 81.5 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	16 Ω
Fs	32.3 Hz
Qts	0.62
Qes	0.656
Qms	11.35
Vas	19.8 L
Sd	365 cm²
Xmax	7 mm
Re	9.04 Ω
Bl	25.3 T·m
Mms	228.8 g
Pe	400 W
Sensitivity	81.5 dB

Alignment hint

EBP	49 · sealed
Sealed Vb (Qtc ≈ 0.71)	≈ 65.8 L

EBP < 50: favours a sealed (closed) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Alpine SWR-10D4	32 -0.3	0.544 -0.08	18 -1.8	10 +3	82.2 +0.7	close	8 Ω vs 16 Ω: amp load changes	+
Alpine SWX-1043D Type-X	31 -1.3	0.54 -0.08	18 -1.8	10.3 +3.3	82.1 +0.6	close	8 Ω vs 16 Ω: amp load changes	+
Rockford Fosgate T0D410	31 -1.3	0.541 -0.08	17 -2.8	8.3 +1.3	82.4 +0.9	close	8 Ω vs 16 Ω: amp load changes	+
Rockford Fosgate T1D410	36 +3.7	0.647 +0.03	15.7 -4.1	7.3 +0.3	82.9 +1.4	usable	8 Ω vs 16 Ω: amp load changes	+
HiVi SP10	34 +1.7	0.573 -0.05	17.1 -2.7	6.7 -0.3	85.8 +4.3	usable	4 Ω vs 16 Ω: amp load changes · Xmax 6.7 mm < 7 mm: lower excursion-limited SPL	+
Kenwood KFC-XW100F	38.6 +6.3	0.72 +0.1	21.05 +1.25	7.5 +0.5	83.4 +1.9	usable	4 Ω vs 16 Ω: amp load changes · 250 W vs 400 W: lower power handling	+
Audiomobile GTS 2110 S4	28 -4.3	0.59 -0.03	25.5 +5.7	12.2 +5.2	81 -0.5	usable	4 Ω vs 16 Ω: amp load changes	+
Kenwood KFC-WPS1000F	38.6 +6.3	0.722 +0.1	21.05 +1.25	8 +1	83.4 +1.9	usable	4 Ω vs 16 Ω: amp load changes · 250 W vs 400 W: lower power handling	+
hertz Hertz Audio ML2500.3	33 +0.7	0.598 -0.02	23.5 +3.7	10.3 +3.3	87.8 +6.3	usable	4 Ω vs 16 Ω: amp load changes	+
Alpine SWR-10D2	31 -1.3	0.505 -0.11	18 -1.8	10 +3	85.1 +3.6	usable	4 Ω vs 16 Ω: amp load changes	+

Compare the closest 3 against the 10TW3-D4 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.