Jinwey YDA-380-4
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 4 Ω |
| Fs | 34.3 Hz |
| Qts | 1.186 |
| Qes | 1.37 |
| Qms | 8.85 |
| Vas | 252.9 L |
| Sd | 901 cm² |
| Xmax | 3 mm |
| Re | 3.8 Ω |
| Bl | 7.6 T·m |
| Mms | 96.9 g |
| Pe | 120 W |
| Sensitivity | 93.9 dB |
Alignment hint
| EBP | 25 · sealed |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | Qts too high |
EBP < 50: favours a sealed (closed) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence ALPHA 15 | 41 +6.7 | 1.263 +0.08 | 260 +7.1 | 3.8 +0.8 | 94 +0.1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Eminence ALPHA 15 A | 41 +6.7 | 1.263 +0.08 | 260 +7.1 | 3.8 +0.8 | 94 +0.1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Eminence ALPHA-15A | 41 +6.7 | 1.26 +0.07 | 260 +7.1 | 3.8 +0.8 | 97 +3.1 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Goldwood GW-215/40/8 | 30.5 -3.8 | 1.087 -0.1 | 261.2 +8.3 | 3.5 +0.5 | 89.8 -4.1 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Jinwey YDA-380-8 | 33.8 -0.5 | 0.922 -0.26 | 278.8 +25.9 | 3 = | 92.3 -1.6 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Carpower SP-382C | 30 -4.3 | 1.279 +0.09 | 320 +67.1 | 3.5 +0.5 | 92.1 -1.8 | usable | + | |
| Europsonic TS30/250D | 34 -0.3 | 1.067 -0.12 | 402.5 +149.6 | 5.4 +2.4 | 92.7 -1.2 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Mercuriale HTR 386 M0 | 32 -2.3 | 1.255 +0.07 | 428.8 +175.9 | 3.6 +0.6 | 91.6 -2.3 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Community 109567 | 42.4 +8.1 | 0.95 -0.24 | 282.3 +29.4 | 3 = | 96.7 +2.8 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| GRS 15PF-8 | 29 -5.3 | 1.394 +0.21 | 265.9 +13 | 4 +1 | 87.7 -6.2 | usable | 8 Ω vs 4 Ω: amp load changes | + |
Compare the closest 3 against the YDA-380-4 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.