JBL STAGE 1010

10" · 4 Ω · 225 W · 92.1 dB

Thiele-Small parameters

Nominal size	10"
Impedance	4 Ω
Fs	37.1 Hz
Qts	0.427
Qes	0.46
Qms	5.92
Vas	41.5 L
Sd	366.4 cm²
Xmax	6.1 mm
Re	3.6 Ω
Bl	12.3 T·m
Mms	83.5 g
Pe	225 W
Sensitivity	92.1 dB

Alignment hint

EBP	81 · flexible
Sealed Vb (Qtc ≈ 0.71)	≈ 23.8 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Aurum Cantus AC250SW	35 -2.1	0.452 +0.03	42 +0.5	5.9 -0.2	90.5 -1.6	close	Xmax 5.9 mm < 6.1 mm: lower excursion-limited SPL	+
Aurum Cantus AC250SW vp	35 -2.1	0.452 +0.03	42 +0.5	5.9 -0.2	90.5 -1.6	close	Xmax 5.9 mm < 6.1 mm: lower excursion-limited SPL	+
McCauley 6222	40 +2.9	0.39 -0.04	41.9 +0.4	7 +0.9	91.5 -0.6	close	8 Ω vs 4 Ω: amp load changes	+
Hertz Audio ES F25.5	39 +1.9	0.44 +0.01	40.2 -1.3	6 -0.1	88.7 -3.4	close	Xmax 6 mm < 6.1 mm: lower excursion-limited SPL	+
Kenwood KFC-W2509	35 -2.1	0.42 -0.01	44 +2.5	8 +1.9	88.2 -3.9	close	175 W vs 225 W: lower power handling	+
HSU Research VTF-2 10	38.4 +1.3	0.45 +0.02	38.51 -2.99	8 +1.9	88.4 -3.7	close		+
Beyma 10NMFS	35 -2.1	0.42 -0.01	45 +3.5	14.5 +8.4	90 -2.1	close	8 Ω vs 4 Ω: amp load changes	+
Faital PRO 10RS350	40 +2.9	0.37 -0.06	44.3 +2.8	7.37 +1.27	91 -1.1	close	8 Ω vs 4 Ω: amp load changes	+
Infinity 1062W 2-8	30.4 -6.7	0.426 =	33.7 -7.8	6.5 +0.4	91.7 -0.4	close	2 Ω vs 4 Ω: amp load changes	+
Focal P25DB	27.5 -9.6	0.431 =	40.7 -0.8	7.5 +1.4	91.2 -0.9	close	2 Ω vs 4 Ω: amp load changes	+

Compare the closest 3 against the STAGE 1010 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.