← all drivers

JBL GTO 1014

10" · 4 Ω · 350 W · 87.8 dB

Thiele-Small parameters

Nominal size10"
Impedance4 Ω
Fs28.7 Hz
Qts0.456
Qes0.48
Qms9.1
Vas29.2 L
Sd330 cm²
Xmax7.3 mm
Re3 Ω
Bl13.5 T·m
Mms160.8 g
Pe350 W
Sensitivity87.8 dB

Alignment hint

EBP60 · flexible
Sealed Vb (Qtc ≈ 0.71)≈ 20.8 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
JBL GTO 1014D29.7 +10.439 -0.0230.2 +17.3 =87.6 -0.2close+
Dayton Audio TIT280C-429.6 +0.90.442 -0.0128.3 -0.98.6 +1.387.8 =close+
Focal P25F31 +2.30.458 =29 -0.26.9 -0.487.6 -0.2closeXmax 6.9 mm < 7.3 mm: lower excursion-limited SPL+
Infinity KAPPA PERFECT 1028.4 -0.30.419 -0.0432.1 +2.97.1 -0.287.1 -0.7close8 Ω vs 4 Ω: amp load changes · Xmax 7.1 mm < 7.3 mm: lower excursion-limited SPL+
Dayton Audio RSS265HO-4427.9 -0.80.484 +0.0328.1 -1.110.2 +2.989.2 +1.4close2 Ω vs 4 Ω: amp load changes+
Wavecor SW259WA0129 +0.30.467 +0.0125 -4.26.3 -186.8 -1close200 W vs 350 W: lower power handling · Xmax 6.3 mm < 7.3 mm: lower excursion-limited SPL+
JBL GT5-1030 +1.30.498 +0.0431.5 +2.36.7 -0.687 -0.8close8 Ω vs 4 Ω: amp load changes · 250 W vs 350 W: lower power handling · Xmax 6.7 mm < 7.3 mm: lower excursion-limited SPL+
Infinity REFERENCE 1060W29 +0.30.42 -0.0432.9 +3.713.0048 +5.788 +0.2close275 W vs 350 W: lower power handling+
MTX Audio T610-4428.4 -0.30.484 +0.0331.7 +2.57.8 +0.584.1 -3.7close8 Ω vs 4 Ω: amp load changes+
Dayton Audio UM10-22 1026.2 -2.50.458 =35.1 +5.910.9 +3.686.9 -0.9close+

Compare the closest 3 against the GTO 1014 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.