JBL 2234H
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 23 Hz |
| Qts | 0.222 |
| Qes | 0.25 |
| Qms | 2 |
| Vas | 458.7 L |
| Sd | 896.1 cm² |
| Xmax | 5.1 mm |
| Re | 6 Ω |
| Bl | 20.2 T·m |
| Mms | 117.5 g |
| Pe | 150 W |
| Sensitivity | 96.7 dB |
Alignment hint
| EBP | 92 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 50.2 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Fluxmag 1504B | 22.5 -0.5 | 0.224 = | 433.8 -24.9 | 7.3 +2.2 | 97 +0.3 | close | + | |
| Davis 40RCA15 vp1 | 21 -2 | 0.231 +0.01 | 450 -8.7 | 5 -0.1 | 96.7 = | close | Xmax 5 mm < 5.1 mm: lower excursion-limited SPL | + |
| Supravox 400 GN-A | 23 = | 0.196 -0.03 | 448 -10.7 | 5 -0.1 | 97.2 +0.5 | close | Xmax 5 mm < 5.1 mm: lower excursion-limited SPL | + |
| Davis 40RCA15 vp FD AUDIO | 22.7 -0.3 | 0.25 +0.03 | 446 -12.7 | 5 -0.1 | 96 -0.7 | close | Xmax 5 mm < 5.1 mm: lower excursion-limited SPL | + |
| Supravox 400-2000EXC_14V | 25 +2 | 0.214 -0.01 | 439 -19.7 | 5 -0.1 | 97.8 +1.1 | close | Xmax 5 mm < 5.1 mm: lower excursion-limited SPL | + |
| Supravox 400-2000EXC_13V | 25 +2 | 0.236 +0.01 | 438 -20.7 | 5 -0.1 | 97.4 +0.7 | close | Xmax 5 mm < 5.1 mm: lower excursion-limited SPL | + |
| Usher Audio 1503HM | 21 -2 | 0.222 = | 528.8 +70.1 | 5.5 +0.4 | 97.2 +0.5 | close | + | |
| Monacor SP-400HT v2 | 22 -1 | 0.241 +0.02 | 510 +51.3 | 5 -0.1 | 96.3 -0.4 | close | Xmax 5 mm < 5.1 mm: lower excursion-limited SPL | + |
| TAD TL-1602 | 21 -2 | 0.212 -0.01 | 519 +60.3 | 5.5 +0.4 | 96.3 -0.4 | close | + | |
| TAD TL-1602 A | 21 -2 | 0.212 -0.01 | 519 +60.3 | 5.5 +0.4 | 96.3 -0.4 | close | + |
Compare the closest 3 against the 2234H →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.