JBL 2226J
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 16 Ω |
| Fs | 40 Hz |
| Qts | 0.31 |
| Qes | 0.33 |
| Qms | 5 |
| Vas | 175.6 L |
| Sd | 882.6 cm² |
| Xmax | 7 mm |
| Re | 10 Ω |
| Bl | 27.4 T·m |
| Mms | 98.4 g |
| Pe | 600 W |
| Sensitivity | 96.3 dB |
Alignment hint
| EBP | 121 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 41.8 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| JBL 2226H | 40 = | 0.31 = | 175.6 = | 7 = | 99.3 +3 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Fane COLOSSUS 15XB | 38 -2 | 0.32 +0.01 | 168 -7.6 | 7.5 +0.5 | 96.2 -0.1 | close | 8 Ω vs 16 Ω: amp load changes · 400 W vs 600 W: lower power handling | + |
| Fane COLOSSUS 15XB v2012 | 38 -2 | 0.322 +0.01 | 168 -7.6 | 7.5 +0.5 | 97.3 +1 | close | 8 Ω vs 16 Ω: amp load changes | + |
| JBL 2255H | 39 -1 | 0.303 -0.01 | 170 -5.6 | 7.1 +0.1 | 98.9 +2.6 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Eminence KAPPA PRO 15 LF v2 | 35 -5 | 0.31 = | 172.5 -3.1 | 8.7 +1.7 | 96.8 +0.5 | close | 8 Ω vs 16 Ω: amp load changes | + |
| JBL 2265 HPL | 37 -3 | 0.325 +0.02 | 176 +0.4 | 8 +1 | 97.9 +1.6 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Celestion TF1530E | 41 +1 | 0.344 +0.03 | 181.7 +6.1 | 8 +1 | 97.1 +0.8 | close | 8 Ω vs 16 Ω: amp load changes · 400 W vs 600 W: lower power handling | + |
| 18 Sound 15NW530 | 43 +3 | 0.33 +0.02 | 154 -21.6 | 7.5 +0.5 | 96 -0.3 | close | 8 Ω vs 16 Ω: amp load changes | + |
| BMS 15S330 | 39 -1 | 0.32 +0.01 | 152 -23.6 | 8 +1 | 98 +1.7 | close | 8 Ω vs 16 Ω: amp load changes | + |
| JBL 2226G | 40 = | 0.31 = | 175.6 = | 7 = | 102.4 +6.1 | close | 4 Ω vs 16 Ω: amp load changes | + |
Compare the closest 3 against the 2226J →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.