JBL 2226H
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 40 Hz |
| Qts | 0.31 |
| Qes | 0.33 |
| Qms | 5 |
| Vas | 175.6 L |
| Sd | 882.6 cm² |
| Xmax | 7 mm |
| Re | 5 Ω |
| Bl | 19.4 T·m |
| Mms | 98.4 g |
| Pe | 600 W |
| Sensitivity | 99.3 dB |
Alignment hint
| EBP | 121 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 41.8 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| JBL 2255H | 39 -1 | 0.303 -0.01 | 170 -5.6 | 7.1 +0.1 | 98.9 -0.4 | close | + | |
| JBL 2226J | 40 = | 0.31 = | 175.6 = | 7 = | 96.3 -3 | close | 16 Ω vs 8 Ω: amp load changes | + |
| JBL 2226G | 40 = | 0.31 = | 175.6 = | 7 = | 102.4 +3.1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Oberton 15NMB35 | 38.93 -1.07 | 0.335 +0.03 | 177.47 +1.87 | 6.75 -0.25 | 99.5 +0.2 | close | Xmax 6.75 mm < 7 mm: lower excursion-limited SPL | + |
| B&C 15CLA76 | 40 = | 0.3 -0.01 | 176 +0.4 | 5.5 -1.5 | 99 -0.3 | close | 350 W vs 600 W: lower power handling · Xmax 5.5 mm < 7 mm: lower excursion-limited SPL | + |
| Fane SOVEREIGN PRO 15-500 | 40 = | 0.319 +0.01 | 192 +16.4 | 6 -1 | 99.4 +0.1 | close | Xmax 6 mm < 7 mm: lower excursion-limited SPL | + |
| PHL Audio 5221 SP | 41 +1 | 0.329 +0.02 | 190 +14.4 | 6.6 -0.4 | 99.5 +0.2 | close | Xmax 6.6 mm < 7 mm: lower excursion-limited SPL | + |
| Eminence KAPPA PRO 15 LFC | 37 -3 | 0.319 +0.01 | 183.2 +7.6 | 7.9 +0.9 | 100.3 +1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| B&C 15 CLA 76 | 40 = | 0.297 -0.01 | 176 +0.4 | 5.4 -1.6 | 99.5 +0.2 | close | 350 W vs 600 W: lower power handling · Xmax 5.4 mm < 7 mm: lower excursion-limited SPL | + |
| JBL 2265 HPL | 37 -3 | 0.325 +0.02 | 176 +0.4 | 8 +1 | 97.9 -1.4 | close | + |
Compare the closest 3 against the 2226H →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.