JBL 2202J

12" · 16 Ω · 150 W · 98.4 dB

Thiele-Small parameters

Nominal size	12"
Impedance	16 Ω
Fs	50 Hz
Qts	0.173
Qes	0.18
Qms	4.3
Vas	87.8 L
Sd	527.1 cm²
Xmax	2.6 mm
Re	11 Ω
Bl	29.4 T·m
Mms	45 g
Pe	150 W
Sensitivity	98.4 dB

Alignment hint

EBP	278 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 5.6 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
JBL 2202H	50 =	0.171 =	87.8 =	2.6 =	101.5 +3.1	close	8 Ω vs 16 Ω: amp load changes	+
JBL 2202A	50 =	0.171 =	87.8 =	2.1 -0.5	101.5 +3.1	close	8 Ω vs 16 Ω: amp load changes · 100 W vs 150 W: lower power handling · Xmax 2.1 mm < 2.6 mm: lower excursion-limited SPL	+
B&C 12PE32	51 +1	0.18 +0.01	101 +13.2	2.8 +0.2	101 +2.6	close	8 Ω vs 16 Ω: amp load changes	+
HH Electronics 1201E	45.5 -4.5	0.171 =	72.7 -15.1	3.3 +0.7	99.3 +0.9	close	8 Ω vs 16 Ω: amp load changes	+
PHL Audio 4050	49 -1	0.197 +0.02	84 -3.8	4.1 +1.5	100.1 +1.7	close	8 Ω vs 16 Ω: amp load changes	+
RCF L 12/584	49 -1	0.186 +0.01	100 +12.2	3 +0.4	101.6 +3.2	close	8 Ω vs 16 Ω: amp load changes	+
P.Audio SN-12B	48.4 -1.6	0.16 -0.01	68 -19.8	3.5 +0.9	98.6 +0.2	close	8 Ω vs 16 Ω: amp load changes	+
B&C 12 PE 32	51 +1	0.185 +0.01	101 +13.2	2.8 +0.2	101.9 +3.5	close	8 Ω vs 16 Ω: amp load changes	+
Elokance 12WF540SUB	41 -9	0.187 +0.01	79.7 -8.1	2.9 +0.3	98 -0.4	close	8 Ω vs 16 Ω: amp load changes	+
BMS 12N810	40.7 -9.3	0.16 -0.01	89.6 +1.8	2.5 -0.1	100 +1.6	close	8 Ω vs 16 Ω: amp load changes · Xmax 2.5 mm < 2.6 mm: lower excursion-limited SPL	+

Compare the closest 3 against the 2202J →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.