JBL 2123J
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 16 Ω |
| Fs | 85 Hz |
| Qts | 0.322 |
| Qes | 0.37 |
| Qms | 2.5 |
| Vas | 19.8 L |
| Sd | 316.1 cm² |
| Xmax | 2.5 mm |
| Re | 8.7 Ω |
| Bl | 17.6 T·m |
| Mms | 24.8 g |
| Pe | 250 W |
| Sensitivity | 96.8 dB |
Alignment hint
| EBP | 230 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 5.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| JBL 2123H | 85 = | 0.322 = | 19.8 = | 2.5 = | 100 +3.2 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Celestion BN10-200S8 | 89.4 +4.4 | 0.352 +0.03 | 20.5 +0.7 | 2.5 = | 99.5 +2.7 | close | 8 Ω vs 16 Ω: amp load changes | + |
| RCF MR 10H300 | 90 +5 | 0.312 -0.01 | 16.5 -3.3 | 2.7 +0.2 | 98.9 +2.1 | close | 8 Ω vs 16 Ω: amp load changes | + |
| LaVoce WAN102.50 | 78 -7 | 0.35 +0.03 | 22.4 +2.6 | 5.1 +2.6 | 97 +0.2 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Oberton 10M250 | 76.65 -8.35 | 0.28 -0.04 | 23.05 +3.25 | 2.75 +0.25 | 97 +0.2 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| B&C 10 NDL 64 vp | 71 -14 | 0.361 +0.04 | 19 -0.8 | 3.1 +0.6 | 95.9 -0.9 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| LaVoce WSN102.50 | 76 -9 | 0.39 +0.07 | 20.71 +0.91 | 2.9 +0.4 | 97.5 +0.7 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| 18 Sound 10NMB420 vp CF1 | 84.8 -0.2 | 0.318 = | 26 +6.2 | 3.3 +0.8 | 100.2 +3.4 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| B&C 10 CXN 64 | 68 -17 | 0.312 -0.01 | 23 +3.2 | 3.5 +1 | 96.9 +0.1 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| SB Audience NERO-10MWN600D | 68 -17 | 0.339 +0.02 | 18.8 -1 | 3.9 +1.4 | 95.8 -1 | usable | 8 Ω vs 16 Ω: amp load changes | + |
Compare the closest 3 against the 2123J →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.