JBL 2020H
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 60 Hz |
| Qts | 0.228 |
| Qes | 0.24 |
| Qms | 4.6 |
| Vas | 65 L |
| Sd | 530 cm² |
| Xmax | 4 mm |
| Re | 4.8 Ω |
| Bl | 17.9 T·m |
| Mms | 42.6 g |
| Pe | 400 W |
| Sensitivity | 101.9 dB |
Alignment hint
| EBP | 250 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 7.5 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| JBL 2020 H | 60 = | 0.228 = | 65 = | 4 = | 101.9 = | close | + | |
| Beyma 12MI100 | 58 -2 | 0.221 -0.01 | 64 -1 | 4.2 +0.2 | 100.4 -1.5 | close | + | |
| JBL M121-8 | 60 = | 0.235 +0.01 | 70.8 +5.8 | 3.6 -0.4 | 101.7 -0.2 | close | 300 W vs 400 W: lower power handling · Xmax 3.6 mm < 4 mm: lower excursion-limited SPL | + |
| Electro-Voice DL12X | 56 -4 | 0.233 +0.01 | 77 +12 | 4.1 +0.1 | 100.7 -1.2 | close | 300 W vs 400 W: lower power handling | + |
| 18 Sound 12ND830 | 58 -2 | 0.24 +0.01 | 63 -2 | 6.5 +2.5 | 99 -2.9 | close | 4 Ω vs 8 Ω: amp load changes | + |
| RCF 12 CX251 | 60 = | 0.266 +0.04 | 62 -3 | 3.7 -0.3 | 100.6 -1.3 | close | 300 W vs 400 W: lower power handling · Xmax 3.7 mm < 4 mm: lower excursion-limited SPL | + |
| RCF CX 12N251 | 60 = | 0.266 +0.04 | 62 -3 | 3.7 -0.3 | 100.6 -1.3 | close | 300 W vs 400 W: lower power handling · Xmax 3.7 mm < 4 mm: lower excursion-limited SPL | + |
| Beyma 12"MI100 | 58 -2 | 0.22 -0.01 | 64 -1 | 3 -1 | 100 -1.9 | close | Xmax 3 mm < 4 mm: lower excursion-limited SPL | + |
| RCF MB 12N301 | 54 -6 | 0.24 +0.01 | 71 +6 | 4.9 +0.9 | 99.7 -2.2 | close | + | |
| RCF MB 12N351 | 55 -5 | 0.201 -0.03 | 61 -4 | 4.7 +0.7 | 100.4 -1.5 | close | + |
Compare the closest 3 against the 2020H →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.