← all drivers

JBL 1501AL-1

15" · 16 Ω · 150 W · 94.6 dB

Thiele-Small parameters

Nominal size15"
Impedance16 Ω
Fs19 Hz
Qts0.191
Qes0.2
Qms4.34
Vas630 L
Sd865.7 cm²
Xmax6.4 mm
Re9.54 Ω
Bl25.8 T·m
Mms117 g
Pe150 W
Sensitivity94.6 dB

Alignment hint

EBP95 · flexible
Sealed Vb (Qtc ≈ 0.71)≈ 49.6 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Audiotechnology FLEXUNIT 15E102251018 -10.222 +0.03600 -308.6 +2.294.5 -0.1close8 Ω vs 16 Ω: amp load changes+
Focal AUDIOM 15VX v317.5 -1.50.211 +0.02717.7 +87.76 -0.495.1 +0.5close8 Ω vs 16 Ω: amp load changes · Xmax 6 mm < 6.4 mm: lower excursion-limited SPL+
Audiotechnology FLEXUNITS 15 E 102 25 1018 -10.22 +0.03600 -308.6 +2.293.2 -1.4close8 Ω vs 16 Ω: amp load changes+
Supravox 400 GMF MK222 +30.206 +0.01633 +37 +0.697.9 +3.3close8 Ω vs 16 Ω: amp load changes+
Focal AUDIOM 15VX v218.4 -0.60.224 +0.03727 +976 -0.496.1 +1.5usable8 Ω vs 16 Ω: amp load changes · Xmax 6 mm < 6.4 mm: lower excursion-limited SPL+
TAD TL-160221 +20.212 +0.02519 -1115.5 -0.996.3 +1.7usable8 Ω vs 16 Ω: amp load changes · Xmax 5.5 mm < 6.4 mm: lower excursion-limited SPL+
TAD TL-1602 A21 +20.212 +0.02519 -1115.5 -0.996.3 +1.7usable8 Ω vs 16 Ω: amp load changes · Xmax 5.5 mm < 6.4 mm: lower excursion-limited SPL+
Altec 515E22.9 +3.90.185 -0.01665.5 +35.54.6 -1.896.5 +1.9usable75 W vs 150 W: lower power handling · Xmax 4.6 mm < 6.4 mm: lower excursion-limited SPL+
Audax HD35S6618 -10.217 +0.03735 +1055 -1.496.4 +1.8usable8 Ω vs 16 Ω: amp load changes · Xmax 5 mm < 6.4 mm: lower excursion-limited SPL+
JBL 136A16 -30.212 +0.02736.2 +106.25.1 -1.394.4 -0.2usable8 Ω vs 16 Ω: amp load changes · 100 W vs 150 W: lower power handling · Xmax 5.1 mm < 6.4 mm: lower excursion-limited SPL+

Compare the closest 3 against the 1501AL-1 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.