JBL 1500 GTI
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 4 Ω |
| Fs | 35 Hz |
| Qts | 0.339 |
| Qes | 0.36 |
| Qms | 5.8 |
| Vas | 189 L |
| Sd | 877 cm² |
| Xmax | 8.2 mm |
| Re | 2.5 Ω |
| Bl | 13.4 T·m |
| Mms | 118 g |
| Pe | 600 W |
| Sensitivity | 100.6 dB |
Alignment hint
| EBP | 97 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 56.4 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence KAPPA PRO 15 LFC | 37 +2 | 0.319 -0.02 | 183.2 -5.8 | 7.9 -0.3 | 100.3 -0.3 | close | Xmax 7.9 mm < 8.2 mm: lower excursion-limited SPL | + |
| DLS SP15 DLS | 33.2 -1.8 | 0.323 -0.02 | 191.7 +2.7 | 8.6 +0.4 | 103.1 +2.5 | close | 2 Ω vs 4 Ω: amp load changes | + |
| DLS SP15 - 2x2 | 33 -2 | 0.323 -0.02 | 191.7 +2.7 | 8.7 +0.5 | 103 +2.4 | close | 2 Ω vs 4 Ω: amp load changes | + |
| Faital PRO 15FH520-4 | 38 +3 | 0.337 = | 156.6 -32.4 | 7.8 -0.4 | 100.6 = | close | Xmax 7.8 mm < 8.2 mm: lower excursion-limited SPL | + |
| Beyma 15LX60 | 35 = | 0.346 +0.01 | 215 +26 | 9 +0.8 | 97.7 -2.9 | close | 8 Ω vs 4 Ω: amp load changes | + |
| PD PDN 15BR40 | 35.7 +0.7 | 0.338 = | 224.8 +35.8 | 9.8 +1.6 | 98.5 -2.1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Precision Devices PDN 15BR40 | 35.7 +0.7 | 0.338 = | 224.8 +35.8 | 9.8 +1.6 | 98.5 -2.1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Faital PRO 15FH500 | 35 = | 0.31 -0.03 | 199.2 +10.2 | 9.25 +1.05 | 98 -2.6 | close | 8 Ω vs 4 Ω: amp load changes | + |
| JBL 2265 HPL | 37 +2 | 0.325 -0.01 | 176 -13 | 8 -0.2 | 97.9 -2.7 | close | 8 Ω vs 4 Ω: amp load changes · Xmax 8 mm < 8.2 mm: lower excursion-limited SPL | + |
| Eminence KAPPA PRO 15 LF-2 | 35 = | 0.307 -0.03 | 198.8 +9.8 | 8.2 = | 97.1 -3.5 | close | 8 Ω vs 4 Ω: amp load changes | + |
Compare the closest 3 against the 1500 GTI →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.