JB Systems PWX12-200
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 59.4 Hz |
| Qts | 0.474 |
| Qes | 0.55 |
| Qms | 3.41 |
| Vas | 55.5 L |
| Sd | 530.9 cm² |
| Xmax | 3.6 mm |
| Re | 6 Ω |
| Bl | 14.4 T·m |
| Mms | 51.2 g |
| Pe | 200 W |
| Sensitivity | 96.5 dB |
Alignment hint
| EBP | 108 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 45.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| P.Audio E12-200S | 59.7 +0.3 | 0.475 = | 49.1 -6.4 | 3.5 -0.1 | 96.6 +0.1 | close | Xmax 3.5 mm < 3.6 mm: lower excursion-limited SPL | + |
| Celestion BN12-300X | 56.2 -3.2 | 0.479 +0.01 | 61.2 +5.7 | 4 +0.4 | 96.1 -0.4 | close | + | |
| RCF L12CX2K | 59.7 +0.3 | 0.46 -0.01 | 65 +9.5 | 4 +0.4 | 96.3 -0.2 | close | 75 W vs 200 W: lower power handling | + |
| Celestion TF 1225 | 63 +3.6 | 0.5 +0.03 | 54.5 -1 | 3.5 -0.1 | 97.9 +1.4 | close | Xmax 3.5 mm < 3.6 mm: lower excursion-limited SPL | + |
| Faital PRO 12FH520 | 55 -4.4 | 0.47 = | 56.4 +0.9 | 7 +3.4 | 97 +0.5 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Fane SOVEREIGN 12-300 vp | 54 -5.4 | 0.455 -0.02 | 59 +3.5 | 4.5 +0.9 | 96.2 -0.3 | close | + | |
| Faital PRO 12HX230 | 55 -4.4 | 0.433 -0.04 | 56.6 +1.1 | 4.7 +1.1 | 96.9 +0.4 | close | + | |
| P.Audio E12-300S | 62 +2.6 | 0.49 +0.02 | 49.05 -6.45 | 3.4 -0.2 | 95.3 -1.2 | close | Xmax 3.4 mm < 3.6 mm: lower excursion-limited SPL | + |
| Celestion TF 1225E | 60.7 +1.3 | 0.414 -0.06 | 50.8 -4.7 | 3.5 -0.1 | 96.8 +0.3 | close | Xmax 3.5 mm < 3.6 mm: lower excursion-limited SPL | + |
| Celestion TF1230 | 59 -0.4 | 0.515 +0.04 | 51.25 -4.25 | 4.8 +1.2 | 94 -2.5 | close | + |
Compare the closest 3 against the PWX12-200 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.