Isophon P30/37A vp
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 16 Ω |
| Fs | 54.6 Hz |
| Qts | 0.555 |
| Qes | 0.65 |
| Qms | 3.78 |
| Vas | 45 L |
| Sd | 491 cm² |
| Xmax | 1.4 mm |
| Re | 8 Ω |
| Bl | 16.4 T·m |
| Mms | 63.9 g |
| Pe | 25 W |
| Sensitivity | 92.5 dB |
Alignment hint
| EBP | 84 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 72.2 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Celestion TF1230 | 59 +4.4 | 0.515 -0.04 | 51.25 +6.25 | 4.8 +3.4 | 94 +1.5 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| HH Electronics DC100LW | 60 +5.4 | 0.56 +0.01 | 56.6 +11.6 | 3.2 +1.8 | 95.2 +2.7 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| 18 Sound 12NTLW3500 | 57 +2.4 | 0.54 -0.02 | 40 -5 | 7.9 +6.5 | 95 +2.5 | usable | + | |
| ERS HP30/150E-8 | 60.4 +5.8 | 0.715 +0.16 | 45.9 +0.9 | 2.8 +1.4 | 93.2 +0.7 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| P.Audio E12-300S | 62 +7.4 | 0.49 -0.07 | 49.05 +4.05 | 3.4 +2 | 95.3 +2.8 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| ATC PA50-314 16 BASS | 71 +16.4 | 0.459 -0.1 | 45 = | 1.3 -0.1 | 94.6 +2.1 | usable | Xmax 1.3 mm < 1.4 mm: lower excursion-limited SPL | + |
| RCF L12/565K | 63 +8.4 | 0.56 +0.01 | 57 +12 | 4 +2.6 | 95.7 +3.2 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| MCM Electronics 55-2992 | 53.6 -1 | 0.402 -0.15 | 44.4 -0.6 | 4.1 +2.7 | 94.5 +2 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| P.Audio E12-200S | 59.7 +5.1 | 0.475 -0.08 | 49.1 +4.1 | 3.5 +2.1 | 96.6 +4.1 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| RCF L 12/565K | 63 +8.4 | 0.56 +0.01 | 57 +12 | 2.9 +1.5 | 97.3 +4.8 | usable | 8 Ω vs 16 Ω: amp load changes | + |
Compare the closest 3 against the P30/37A vp →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.