Infinity KAPPA PERFECT 10
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 28.4 Hz |
| Qts | 0.419 |
| Qes | 0.44 |
| Qms | 8.83 |
| Vas | 32.1 L |
| Sd | 346 cm² |
| Xmax | 7.1 mm |
| Re | 4.11 Ω |
| Bl | 16.5 T·m |
| Mms | 164.6 g |
| Pe | 350 W |
| Sensitivity | 87.1 dB |
Alignment hint
| EBP | 65 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 17.4 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Infinity REFERENCE 1060W | 29 +0.6 | 0.42 = | 32.9 +0.8 | 13.0048 +5.9 | 88 +0.9 | close | 4 Ω vs 8 Ω: amp load changes · 275 W vs 350 W: lower power handling | + |
| JBL GTO 1014D | 29.7 +1.3 | 0.439 +0.02 | 30.2 -1.9 | 7.3 +0.2 | 87.6 +0.5 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Dayton Audio TS280D-4 | 25.6 -2.8 | 0.404 -0.01 | 33.7 +1.6 | 8.3 +1.2 | 87.1 = | close | 4 Ω vs 8 Ω: amp load changes | + |
| JBL GT4-10 | 29.6 +1.2 | 0.421 = | 36.1 +4 | 7.1 = | 88.6 +1.5 | close | 4 Ω vs 8 Ω: amp load changes · 250 W vs 350 W: lower power handling | + |
| JBL GTO 1014 | 28.7 +0.3 | 0.456 +0.04 | 29.2 -2.9 | 7.3 +0.2 | 87.8 +0.7 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Dayton Audio TIT280C-4 | 29.6 +1.2 | 0.442 +0.02 | 28.3 -3.8 | 8.6 +1.5 | 87.8 +0.7 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Focal P25F | 31 +2.6 | 0.458 +0.04 | 29 -3.1 | 6.9 -0.2 | 87.6 +0.5 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 6.9 mm < 7.1 mm: lower excursion-limited SPL | + |
| JBL GT5-10 | 30 +1.6 | 0.498 +0.08 | 31.5 -0.6 | 6.7 -0.4 | 87 -0.1 | close | 250 W vs 350 W: lower power handling · Xmax 6.7 mm < 7.1 mm: lower excursion-limited SPL | + |
| Monacor BLACKBASS 10 | 32 +3.6 | 0.432 +0.01 | 30 -2.1 | 6.8 -0.3 | 85.3 -1.8 | close | 16 Ω vs 8 Ω: amp load changes · 250 W vs 350 W: lower power handling · Xmax 6.8 mm < 7.1 mm: lower excursion-limited SPL | + |
| Dayton Audio UM10-22 10 | 26.2 -2.2 | 0.458 +0.04 | 35.1 +3 | 10.9 +3.8 | 86.9 -0.2 | close | 4 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the KAPPA PERFECT 10 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.