Infinity KAPPA 120.9W
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 27.2 Hz |
| Qts | 0.43 |
| Qes | 0.52 |
| Qms | 2.47 |
| Vas | 54.4 L |
| Sd | 518.8 cm² |
| Xmax | 6.7 mm |
| Re | 4.3 Ω |
| Bl | 18.3 T·m |
| Mms | 237.3 g |
| Pe | 350 W |
| Sensitivity | 87.9 dB |
Alignment hint
| EBP | 52 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 31.9 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Sony XS-L121P5 | 26.4 -0.8 | 0.42 -0.01 | 55.5 +1.1 | 7.5 +0.8 | 85.5 -2.4 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Monacor SONIC 12 vp | 27 -0.2 | 0.469 +0.04 | 51 -3.4 | 6.3 -0.4 | 88.1 +0.2 | close | Xmax 6.3 mm < 6.7 mm: lower excursion-limited SPL | + |
| Alpine SWR-12D2 vp | 27 -0.2 | 0.441 +0.01 | 46 -8.4 | 10 +3.3 | 87.8 -0.1 | close | + | |
| Max Speaker MF300/77S4 | 26.4 -0.8 | 0.383 -0.05 | 53.1 -1.3 | 6.7 = | 89 +1.1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Infinity 120.3SE | 28.4 +1.2 | 0.475 +0.04 | 55.6 +1.2 | 6.8 +0.1 | 89.5 +1.6 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Earthquake Sound SUBZERO-12 | 26.8 -0.4 | 0.424 -0.01 | 58.1 +3.7 | 12.7 +6 | 86.2 -1.7 | close | + | |
| Rockford Fosgate T0D212 | 25.3 -1.9 | 0.473 +0.04 | 55 +0.6 | 10.5 +3.8 | 88 +0.1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| JBL GTO 1214 | 28 +0.8 | 0.469 +0.04 | 58.2 +3.8 | 7.3 +0.6 | 89.4 +1.5 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Ground Zero GZRW 12XD-AL | 29 +1.8 | 0.451 +0.02 | 52 -2.4 | 9.2 +2.5 | 86.1 -1.8 | close | + | |
| Pioneer TS-W126C(PREMIER) | 32.6 +5.4 | 0.42 -0.01 | 55.614 +1.21 | 8.7 +2 | 88.4 +0.5 | close | 4 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the KAPPA 120.9W →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.