← all drivers

Infinity 902-3061

10" · 4 Ω · 150 W · 92.9 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance4 Ω
Fs27 Hz
Qts0.475
Qes0.55
Qms3.48
Vas148 L
Sd344 cm²
Xmax4 mm
Re3.4 Ω
Bl6.4 T·m
Mms38.9 g
Pe150 W
Sensitivity92.9 dB

Alignment hint

EBP49 · sealed
Sealed Vb (Qtc ≈ 0.71)≈ 121.7 L

EBP < 50: favours a sealed (closed) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Audax PR240SB27 =0.459 -0.02155 +74 =90.9 -2close8 Ω vs 4 Ω: amp load changes · 80 W vs 150 W: lower power handling+
Morel MW 107728 +10.501 +0.03147 -14.3 +0.389.9 -3close8 Ω vs 4 Ω: amp load changes+
Audax WFR24 Ticonal30 +30.457 -0.02162.4 +14.44 =91.7 -1.2close8 Ω vs 4 Ω: amp load changes · 30 W vs 150 W: lower power handling+
Siare 28SPCR26 -10.499 +0.02143 -54 =89.2 -3.7close8 Ω vs 4 Ω: amp load changes · 60 W vs 150 W: lower power handling+
SEAS P25REX27 =0.437 -0.04156.8 +8.86 +290.7 -2.2close8 Ω vs 4 Ω: amp load changes · 80 W vs 150 W: lower power handling+
SEAS P25REX/DD27 =0.437 -0.04156.8 +8.86 +290.7 -2.2close8 Ω vs 4 Ω: amp load changes · 80 W vs 150 W: lower power handling+
Peerless 83253127.4 +0.40.41 -0.06160.6 +12.64 =91.4 -1.5close8 Ω vs 4 Ω: amp load changes · 110 W vs 150 W: lower power handling+
Dayton Audio RS270S-826.9 -0.10.41 -0.06147.2 -0.86 +290 -2.9close8 Ω vs 4 Ω: amp load changes · 100 W vs 150 W: lower power handling+
Cube F10 NEO30 +30.505 +0.03127 -215.1 +1.191.8 -1.1close8 Ω vs 4 Ω: amp load changes · 30 W vs 150 W: lower power handling+
Audax HT240M0 vp127.5 +0.50.404 -0.07172 +244.5 +0.591.7 -1.2close8 Ω vs 4 Ω: amp load changes · 80 W vs 150 W: lower power handling+

Compare the closest 3 against the 902-3061 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.