Infinity 1062W 2-8
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 2 Ω |
| Fs | 30.4 Hz |
| Qts | 0.426 |
| Qes | 0.45 |
| Qms | 7.98 |
| Vas | 33.7 L |
| Sd | 363 cm² |
| Xmax | 6.5 mm |
| Re | 1.8 Ω |
| Bl | 10.7 T·m |
| Mms | 150.3 g |
| Pe | 275 W |
| Sensitivity | 91.7 dB |
Alignment hint
| EBP | 68 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 19.2 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| JBL GT4-10 | 29.6 -0.8 | 0.421 -0.01 | 36.1 +2.4 | 7.1 +0.6 | 88.6 -3.1 | close | 4 Ω vs 2 Ω: amp load changes | + |
| Powerbass L-104D 10 | 31.5 +1.1 | 0.393 -0.03 | 35 +1.3 | 8.4 +1.9 | 93.1 +1.4 | close | + | |
| Focal P25DB | 27.5 -2.9 | 0.431 +0.01 | 40.7 +7 | 7.5 +1 | 91.2 -0.5 | close | + | |
| JBL GTO 1002D | 27 -3.4 | 0.429 = | 38.7 +5 | 6.3 -0.2 | 93.2 +1.5 | close | Xmax 6.3 mm < 6.5 mm: lower excursion-limited SPL | + |
| Infinity KAPPA PERFECT 10 | 28.4 -2 | 0.419 -0.01 | 32.1 -1.6 | 7.1 +0.6 | 87.1 -4.6 | close | 8 Ω vs 2 Ω: amp load changes | + |
| JBL GTO 1014D | 29.7 -0.7 | 0.439 +0.01 | 30.2 -3.5 | 7.3 +0.8 | 87.6 -4.1 | close | 4 Ω vs 2 Ω: amp load changes | + |
| Infinity REFERENCE 1060W | 29 -1.4 | 0.42 -0.01 | 32.9 -0.8 | 13.0048 +6.5 | 88 -3.7 | close | 4 Ω vs 2 Ω: amp load changes | + |
| MTX Audio RT10-04 | 32 +1.6 | 0.49 +0.06 | 32.6 -1.1 | 6.7 +0.2 | 89.1 -2.6 | close | 4 Ω vs 2 Ω: amp load changes | + |
| Focal P25F | 31 +0.6 | 0.458 +0.03 | 29 -4.7 | 6.9 +0.4 | 87.6 -4.1 | usable | 4 Ω vs 2 Ω: amp load changes | + |
| JBL STAGE 1010 | 37.1 +6.7 | 0.427 = | 41.5 +7.8 | 6.1 -0.4 | 92.1 +0.4 | usable | 4 Ω vs 2 Ω: amp load changes · Xmax 6.1 mm < 6.5 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 1062W 2-8 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.