Infinity 1030W

10" · 4 Ω · 250 W · 88 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	4 Ω
Fs	29.62 Hz
Qts	0.39
Qes	0.42
Qms	6.24
Vas	35.72 L
Sd	355 cm²
Xmax	12.25 mm
Re	3.48 Ω
Bl	14.96 T·m
Mms	143.05 g
Pe	250 W
Sensitivity	88 dB

Alignment hint

EBP	71 · flexible
Sealed Vb (Qtc ≈ 0.71)	≈ 15.6 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Infinity REFERENCE 1060W	29 -0.62	0.42 +0.03	32.9 -2.82	13.0048 +0.75	88 =	close		+
Infinity KAPPA PERFECT 10.1	28.35 -1.27	0.42 +0.03	38.511 +2.79	14.15 +1.9	84.8 -3.2	close		+
Audio System HX10 SQ	27.6 -2.02	0.39 =	31.5 -4.22	11.75 -0.5	83.9 -4.1	close	Xmax 11.75 mm < 12.25 mm: lower excursion-limited SPL	+
Dayton Audio UM10-22 10	26.2 -3.42	0.458 +0.07	35.1 -0.62	10.9 -1.35	86.9 -1.1	usable	Xmax 10.9 mm < 12.25 mm: lower excursion-limited SPL	+
JBL GT4-10	29.6 -0.02	0.421 +0.03	36.1 +0.38	7.1 -5.15	88.6 +0.6	usable	Xmax 7.1 mm < 12.25 mm: lower excursion-limited SPL	+
Alpine SWA-10S4	32 +2.38	0.42 +0.03	41 +5.28	10 -2.25	86.6 -1.4	usable	Xmax 10 mm < 12.25 mm: lower excursion-limited SPL	+
Morel ULTIMO 102	27 -2.62	0.391 =	47.4 +11.68	13.4 +1.15	90.8 +2.8	usable	2 Ω vs 4 Ω: amp load changes	+
JL Audio 10W6V2-D4	28.5 -1.12	0.469 +0.08	33.4 -2.32	11.9 -0.35	84.9 -3.1	usable	8 Ω vs 4 Ω: amp load changes · Xmax 11.9 mm < 12.25 mm: lower excursion-limited SPL	+
JL Audio 10W7AE-3	30.6 +0.98	0.537 +0.15	36.1 +0.38	12 -0.25	89.1 +1.1	usable	Xmax 12 mm < 12.25 mm: lower excursion-limited SPL	+
Brax BRAX MATRIX ML10	35 +5.38	0.46 +0.07	40 +4.28	12.5 +0.25	87.3 -0.7	usable		+

Compare the closest 3 against the 1030W →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.