HiVi W10
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 35 Hz |
| Qts | 0.368 |
| Qes | 0.45 |
| Qms | 2.02 |
| Vas | 81.4 L |
| Sd | 363 cm² |
| Xmax | 6.2 mm |
| Re | 6.5 Ω |
| Bl | 12.2 T·m |
| Mms | 46.9 g |
| Pe | 150 W |
| Sensitivity | 91.8 dB |
Alignment hint
| EBP | 78 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 30.2 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Tang Band WT-644F | 32 -3 | 0.357 -0.01 | 77 -4.4 | 7.9 +1.7 | 91.3 -0.5 | close | + | |
| Sica 10 H 2 CS | 30.3 -4.7 | 0.37 = | 84.3 +2.9 | 6 -0.2 | 90.8 -1 | close | Xmax 6 mm < 6.2 mm: lower excursion-limited SPL | + |
| Faital PRO 10FE330 | 35 = | 0.4 +0.03 | 72.4 -9 | 8.32 +2.12 | 92 +0.2 | close | + | |
| JBL LE10H-1 | 33 -2 | 0.369 = | 76.5 -4.9 | 5 -1.2 | 92.7 +0.9 | close | 60 W vs 150 W: lower power handling · Xmax 5 mm < 6.2 mm: lower excursion-limited SPL | + |
| JBL LE10H | 33 -2 | 0.369 = | 76.5 -4.9 | 5 -1.2 | 92.7 +0.9 | close | 60 W vs 150 W: lower power handling · Xmax 5 mm < 6.2 mm: lower excursion-limited SPL | + |
| Davis 25GC10R | 37.2 +2.2 | 0.397 +0.03 | 80.9 -0.5 | 5.7 -0.5 | 93.5 +1.7 | close | 100 W vs 150 W: lower power handling · Xmax 5.7 mm < 6.2 mm: lower excursion-limited SPL | + |
| SICA 10 H 2 CS 8 Ohms | 36 +1 | 0.393 +0.03 | 65.4 -16 | 6 -0.2 | 91.8 = | close | Xmax 6 mm < 6.2 mm: lower excursion-limited SPL | + |
| Focal 11V 7511 v2008 | 30.8 -4.2 | 0.362 -0.01 | 94.3 +12.9 | 8 +1.8 | 91.5 -0.3 | close | + | |
| STX W.27.400.8.MC | 31 -4 | 0.329 -0.04 | 79 -2.4 | 7.6 +1.4 | 91.6 -0.2 | close | + | |
| Eminence LEGEND BP102 | 35 = | 0.432 +0.06 | 91.2 +9.8 | 6.2 = | 92.7 +0.9 | close | + |
Compare the closest 3 against the W10 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.