← all drivers

HiVi S10II

10" · 8 Ω · 150 W · 94.7 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance8 Ω
Fs20 Hz
Qts0.171
Qes0.18
Qms3.61
Vas219.3 L
Sd363 cm²
Xmax7 mm
Re4.2 Ω
Bl12.5 T·m
Mms53.3 g
Pe150 W
Sensitivity94.7 dB

Alignment hint

EBP111 · ported
Sealed Vb (Qtc ≈ 0.71)≈ 13.6 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Monacor SPH-250CTC vp CARBON20 =0.247 +0.08220 +0.77.5 +0.594 -0.7usable4 Ω vs 8 Ω: amp load changes · 100 W vs 150 W: lower power handling+
Ciare HS25019 -10.242 +0.07194 -25.38 +193.6 -1.1usable4 Ω vs 8 Ω: amp load changes · 70 W vs 150 W: lower power handling+
Focal 10N 50121.8 +1.80.231 +0.06212.7 -6.66 -192.5 -2.2usable60 W vs 150 W: lower power handling · Xmax 6 mm < 7 mm: lower excursion-limited SPL+
Focal 10N51021.8 +1.80.231 +0.06212.7 -6.66 -192.5 -2.2usable85 W vs 150 W: lower power handling · Xmax 6 mm < 7 mm: lower excursion-limited SPL+
Focal 10L 641122.4 +2.40.253 +0.08210.4 -8.98 +193.5 -1.2usable+
Monacor SPH-250CTC20 =0.247 +0.08220 +0.74.5 -2.594 -0.7usable4 Ω vs 8 Ω: amp load changes · 100 W vs 150 W: lower power handling · Xmax 4.5 mm < 7 mm: lower excursion-limited SPL+
Accuton S280-6-28220 =0.263 +0.09226 +6.76 -190.9 -3.8usableXmax 6 mm < 7 mm: lower excursion-limited SPL+
Philips AD10240/W823 +30.261 +0.09248.2 +28.97.8 +0.893.6 -1.1usable60 W vs 150 W: lower power handling+
Accuton AS250-4-552-vp20 =0.247 +0.08162.4 -56.99 +292.6 -2.1usable4 Ω vs 8 Ω: amp load changes+
Infinity BETA TWELVE 1222 +20.242 +0.07158 -61.310 +394.8 +0.1usable4 Ω vs 8 Ω: amp load changes+

Compare the closest 3 against the S10II →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.